Panasonic CYVHD9500U Operations Instructions download pdf

CY-VHD9500U

Troubleshooting

Preliminary Steps

Check and take steps as described in the tables below.

If You Suspect Something Wrong

Immediately switch the power off.

Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for

repairs. Never try to repair the unit by yourself because it is dangerous to do so.

WARNING:

≥ Do not use the product when it is broken or there is some abnormality.

In the unlikely event that the product breaks (such as when no image is displayed or there is no sound)

or there is some abnormality (such as when a foreign object is inside the product, water was spilled

on it, smoke comes out or the product makes a strange smell), immediately stop using the product and

be sure to contact the store from which you purchased your product or a nearby Panasonic Servicenter.

Continuing to use the product in that condition could cause accidents, ﬁ re or electrical shock.

Troubleshooting Tips

Common

No power to the unit.

The power cord (battery, ACC and

ground) is connected in the wrong

way.

Check the wiring.

Fuse blow out. Eliminate the cause of fuse blow out

and replace the fuse with new one.

Consult your dealer.

Problem Possible cause Possible solution

Sound is not

generated.

The volume on the headphones is

adjusted to zero.

Raise the volume on the headphones.

Cables are not correctly connected. Connect cables correctly.

MAIN POWER switch is set to OFF. Switch MAIN POWER to ON.

The power of headphones is set to

OFF.

Switch the power of headphones to

ON.

Problem Possible cause Possible solution

Noise There is an electromagnetic-wave

generator such as a cellular phone

near the unit or its electrical lines.

Keep an electromagnetic-wave

generator such as a cellular phone

away from the unit and the wiring of

the unit. In case the noise cannot be

eliminated due to the wiring harness

of the car, consult your dealer.

The contact of the ground lead is

poor.

Make sure that the ground lead is

securely connected to an unpainted

part of the chassis.

The headphones are too far from

this unit.

Use the headphones within a distance

of 2.5 m from the unit.

The path between the unit and

headphones is obstructed by

something.

The batteries of the IR wireless

headphones have run down.

When using the headphones, remove

any obstacles that obstruct the path

between the headphones and unit.

Replace the batteries.

Common (continued)

Monitor

The tilt angle or

the lateral angle of

the display is not

adjustable.

There is an obstacle. Install the unit where the unit moves

freely.

Problem Possible cause Possible solution

Noise is made in

step with engine

revolutions.

Alternator noise comes from the

car.

Change the wiring position of the

ground lead.

Mount a noise ﬁ lter on the power supply.

Dome light

Dome lights do not

come on.

The wires are not connected

properly.

For the wiring connections of the dome

lights, consult a specialized contractor

or your dealer where you purchased

the unit.

Problem Possible cause Possible solution

The dome light switch is at the OFF

position.

Set it to the ON position.

The batteries of the IR wireless

headphones have run down.

Replace the batteries.

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Troubleshooting

86CY-VHD9500UCY-VHD9500U87TroubleshootingENGLISH43Preliminary StepsCheck and take steps as described in the tables below.If You Suspect Something Wron

Page 2

88CY-VHD9500UCY-VHD9500U89Troubleshooting (continued)ENGLISH45Sound skipping or noiseThere is a ﬂ aw or foreign objects on the disc.Remove the foreign

Page 3

90CY-VHD9500UCY-VHD9500U91VCR, Camcorder, etc.Problem Possible cause Possible solutionThe picture from a VCR or a camcorder is not displayed.A VCR or

Page 4

92CY-VHD9500UCY-VHD9500U93Troubleshooting (continued)ENGLISH49ENGLISH50MaintenanceYour product is designed and manufactured to ensure a minimum of mai

Page 5 - Notes on Discs/Cards

94CY-VHD9500UCY-VHD9500U95Notes on Discs/CardsNotes on CD-Rs/RWs≥ You may have trouble playing back some CD-R/RW discs recorded on CD recorders (CD-R/

Page 6 - Deﬁ nition of Terms

96CY-VHD9500UCY-VHD9500U97Language Code ListENGLISH53Code Language Name 8084 Portuguese8185 Quechua8277 Rhaeto-Romance8279 Romanian8285 Russian8365 Sa

Page 7 - (U.S.A) (CANADA)

98CY-VHD9500UCY-VHD9500U99ENGLISH55ENGLISH56Customer Services DirectoryFor Product Information, Operating Assistance, Literature Request, Dealer Locat

Page 8 - Speciﬁ cations

100CY-VHD9500UCY-VHD9500U101ENGLISH57Speciﬁ cationsGeneralPower supply: DC 12 V (11 V–16 V), test voltage 14.4 V, negative groundCurrent consumption: