Panasonic AW-HB505 User Manual download pdf (Page 22)

-20-

• Total Pedestal Adjustment

Total pedestal adjustment is made to adjust the

pedestals of two or more cameras. Using an oscillo-

scope or a waveform monitor, adjust the pedestals to 5

IRE (0.035 V) or 7.5 IRE (0.050 V) with T.PED Control of

the multi hybrid control panel.

T.PED CABLE COMP

T. PED Control

5 IRE (0.035V) or

7.5 IRE (0.050V)

3) Set the switches for gain, shutter, etc. as appropriate

to the conditions of using the camera.

4) Set the camera control switch on the multi hybrid con-

trol panel to the OFF position.

5) Repeat Steps 1 to 4 to finish cable compensation, G/L

adjustment, total pedestal adjustment, and switch set-

ting for all the cameras.

4. White Balance and Black Balance

Setting

1) Select a camera with the CONTROL switch on the multi

hybrid control panel.

2) Select a camera with the CONTROL switch on the multi

hybrid control panel.

• White balance adjustment is necessary when using the

camera for the first time, or if the camera has not been

used for a long period of time.

• Once the white balance is adjusted, no readjustment is

necessary if the camera is used under the same condi-

tions.

• Automatic White Balance Control (AWC)

The color temperature conditions for two channels A

and B can be stored in the memory in advance. Once

the white balance is adjusted, all that is needed is to

select either AUTO/ATW A Switch or AUTO/ATW B

Switch of the multi hybrid control panel. if the camera is

used under the same conditions. No readjustment is

necessary. If the white balance is readjusted, the exist-

ing white balance data is replaced with new data.

q Press either AUTO/ATW A Switch or AUTO/ATW B

switch of the multi hybrid control panel.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Panasonic AW-HB505 User Manual Page 22