Panasonic PT-L735U User Manual download pdf (Page 56)

56-ENGLISH

Lamp unit replacement procedure

# Turn off the MAIN POWER

switch according to the

procedure given in “Turning off

the power” on page 25, and

then disconnect the power cord

plug from the wall outlet and

check that the area around the

lamp unit has cooled down.

$ Use a Phillips screwdriver to

turn the lamp unit cover fixing

screws at the bottom of the

projector, and then remove the

lamp unit cover from the

projector.

% Use a Phillips screwdriver to

loosen the two lamp unit fixing

screws until the screws turn

freely. Then hold the handle of

the lamp unit and gently pull it

out from the projector.

& Insert the new lamp unit while

making sure that the direction

of insertion is correct, and then

use a Phillips screwdriver to

securely tighten the lamp unit

fixing screws.

Lamp indicator warning

light

On-screen display

Illuminates red during

image projection and

standby mode.

Displayed for 30

seconds. Pressing any

button will clear the

display.

More than 1 800 hours

Remains displayed until

any button is pressed.

More than 2 000 hours

NOTE:

B If the lamp usage time has passed 2 000 hours (when LAMP POWER

has been set to “HIGH”), the projector will switch to standby mode after

approximately 10 minutes of operation. The steps ) to - on the next

page should thus be completed within 10 minutes.

Lamp unit cover

Lamp unit cover fixing screws

Handle

Lamp unit fixing screws

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 66 67

Comments to this Manuals

No comments

Panasonic PT-L735U User Manual Page 56

Comments to this Manuals

Related products and manuals for Data projectors Panasonic PT-L735U