Panasonic PT-TW240U Operations Instructions download pdf (Page 46)

Options

- ENGLISH

Settings

Attention

If [Lamp Life Reminder] is set to [Off], the lamp warning

message will not be displayed when the lamp used time

reaches the end of lamp life. In this case, please check

the lamp life with the values at the [Lamp Hours Used

(Normal)] and [Lamp Hours Used (ECO)].

Lamp Power Mode

Selects desired lamp power mode under

different situations.

Press ▲▼ to select [Lamp Power Mode].1 )

Press ► to display the setting dialog box2 ) .

Press ◄► to select the desired item.3 )

Normal

Normal brightness.

AUTO

The brightness level of the content is

automatically detected to signicantly

reduced lamp power consumption

during periods of inactivity.

ECO1

Lower brightness reduces the lamp

power consumption and extends the

lamp life.

ECO2

Lowest brightness reduces the lamp

power consumption and extends the

lamp life.

Note

When there is no signal for more than 5 minutes, the

lamp power will be decreased automatically for power

saving.

Clear Lamp Hours

Reset the lamp usage time after replacing the

lamp unit.

Press ▲▼ to select [Clear Lamp Hours].1 )

Press ► to display the setting dialog box2 ) .

Press 3 )

▲▼

to switch [Yes]/[No].

Press ► to execute.4 )

High Altitude

Set to [On] when the projector is used at elevation

approx. 1 000 m (3 300 ft) and approx. 3 000 m

(10 000 ft).

Press ▲▼ to select [High Altitude].1 )

Press ► to display the adjustment 2 )

dialog box.

Press ◄► to switch [On]/[Off].3 )

For the elevation approx. 1 000 m

(3 300 ft) and approx. 3 000 m

(10 000 ft).

Off

For the elevation below approx.

1 000 m (3 300 ft).

Note

When [On] is selected, the speed and the noise of the

fan will increase.

Dust Filter Reminder

Set the cleaning cycle of the lters and reset the use

time of the lters.

Press ▲▼ to select [Dust Filter 1 )

Reminder].

Press ► to display the setting dialog box. 2 )

Filters Remind (Hour)

Set the timer to display the Dust Filter Reminder

message

(

page 55).

Press ▲▼ to select [Filters Remind].1 )

Press ► to display the adjustment 2 )

dialog box.

Press ◄► to set the time.3 )

The factory default is 0 hour.

You can set the time in 50 hours intervals and

the longest set time is 1 000 hours.

Cleaning up Reminder

Reset the air lter used time to zero.

Reset the air lter hour counter after cleaning

or replacing the dust lter.

Press ▲▼ to select [Cleaning up 1 )

Reminder].

Press ► to display the setting dialog box.2 )

Press ▲▼ to switch [Yes]/[No].3 )

Press ► to execute.4 )

Note

It is recommended to clean the air lters regularly every

500 hours of usage.

Information

Displays the input signal source and setting state

information of the projector.

Press ▲▼ to select [Information].1 )

Press ► to display the information 2 )

dialog box.

Displays [Model Name], [Source], [Resolution],

[Software Version], [Color Space] and [Aspect

Ratio].

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 73 74

Comments to this Manuals

No comments

Panasonic PT-TW240U Operations Instructions Page 46

Comments to this Manuals

Related products and manuals for Data projectors Panasonic PT-TW240U