Panasonic PTAE700E Operations Instructions download pdf (Page 24)

ENGLISH-47

Adjustments and settings

46-ENGLISH

Option settings

Press the F or G button to select

an item, and then press the I or H

button to change the setting.

OSD

ON

The signal name is displayed in the

top-right corner of the screen when

the input signal is changed.

OFF

Use this setting when you do not

want the signal name to be

displayed.

Noise Reduction (NR)

If the signal is of such poor quality

that picture interference appears,

set “NR” to “ON”. To turn off the

“NR” feature, set to “OFF”.

OPTION

OSD ON

NR ON

CINEMA REALITY ON

BACK COLOUR BLUE

WSS ON

FRONT/REAR FRONT

DESK/CEILING DESK

FAN CONTROL NORMAL

LAMP POWER HIGH

LAMP RUNTIME 5H

SELECT ADJ ESC

CINEMA REALITY

[S-VIDEO/VIDEO/PC/HDMI/525i

(480i), 625i(576i), 1 125(1 080)/60i

and 1 125(1 080)/50i YP

BPR only]

ON

Set to “ON” when you would like 24

frames per second pictures (such as

movies) to project the source

faithfully.

OFF

Set to “OFF” when the projected

pictures have problems with

captions or subtitles when the

setting is “ON”.

BACK COLOUR

This sets the colour which is

projected onto the screen when no

signal is being input to the projector.

WSS

ON

When the device connected to

SCART is turned on, the input select

setting will be switched to SCART

automatically, and “ASPECT” will

also be set automatically.

When WSS (Wide Screen

Signalling) is detected from PAL or

625i(576i)

YPBPR

signals, the

aspect ratio will also be switched

automatically.

OSD ON

[

OFF

NR ON

[

OFF

BACK COLOUR BLUE

[

BLACK

CINEMA REALITY ON

[

OFF

OFF

When SCART signals are being

input, the input select setting and

“ASPECT” will not be set

automatically.

WSS will not be detected from PAL

or 625i(576i) YPBPR signals.

FRONT/REAR

This setting should be changed in

accordance with the projector

setting-up method.

(Refer to page 16.)

FRONT

When the projector is placed in front

of a screen.

REAR

When using a translucent screen.

DESK/CEILING

This setting should be changed in

accordance with the projector

setting-up method.

(Refer to page 16.)

DESK

When the projector is placed on a

desk or similar.

CEILING

When the projector is suspended

from a ceiling using the ceiling

bracket (sold separately).

FAN CONTROL

Set “FAN CONTROL” to “HIGH”,

when using this projector at high

elevations (above 1 400 m) only.

LAMP POWER

This setting changes the lamp

brightness. When set to “LOW”, the

luminance of the lamp is reduced,

but the projector uses less power,

and the operating noise is also

reduced.

The “LOW” setting is recommended

for narrow rooms where a high

picture luminance is not essential or

for watching movies.

LAMP RUNTIME

This setting displays the usage time

for the lamp unit which is currently

being used. When replacing the

lamp unit, follow the instructions on

page 52, and reset “LAMP

RUNTIME” to “0”.

DESK/CEILING DESK

[

CEILING

LAMP POWER HIGH

[

LOW

FRONT/REAR FRONT

[

REAR

NOTE:

B The lamp’s operating life varies

depending on the usage

conditions (such as the “LAMP

POWER” setting and the

number of times the power is

turned on and off).

WSS ON

[

OFF

NOTE:

B “LAMP POWER” cannot be set

when no signal is being input.

NOTE:

B The setting for “TV-SYSTEM”

will also be displayed when an

S-VIDEO/VIDEO signal is being

input.

NOTE:

B “NR” cannot be set when HDMI

signals are being input.

FAN CONTROL NORMAL

[

HIGH

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments