Panasonic WJ-ND400 Installation Guide download pdf (Page 43)

■ Check the IP address

It is possible to check the DHCP status, IP address, subnet mask, gateway* and HTTP port* for each port. Each port will be dis-

played as follows.

Camera port: PT#1, Client PC port: PT#2, Maintenance port: PT#3

The display of each port can be shifted using the arrow button (left or right).

* The settings of "Gateway" and "HTTP port" can be checked with the display of the client PC port (PT#2).

The default network settings of the recorder are as follows.

Item Camera port Client PC port Maintenance port

DHCP − OFF −

IP address 192.168.0.250 192.168.1.250 192.168.2.250

Subnet mask 255.255.255.0 255.255.255.0 255.255.255.0

Default gateway − 192.168.1.1 −

HTTP port − 80 −

Shift the display and configure each setting as described below.

The display on the LCD will shift by pressing the arrow button (up or down).

[SET]

[ESC]

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 63 64

No comments

Panasonic WJ-ND400 Installation Guide Page 43