Panasonic DMRE500H Operations Instructions download pdf (Page 16)

RQT7755

Getting started

STEP 4

Multi-channel speaker setting

Set as follows when connecting with AUDIO OUT 5.1ch terminals

(➡ page 10).

1 While stopped

Press [FUNCTIONS].

2 Press [3, 4, 2, 1] to select

“SETUP” and press [ENTER].

3 Press [3, 4] to select “Sound” and

press [1].

4 Press [3, 4] to select “Speaker” and

press [ENTER].

5 Press [3, 4] to select “Multi-

Channel” and press [ENTER].

Settings a, b, and c can be changed as necessary.

6 Press [3, 4, 2, 1] to select the

speaker icon and press [ENTER].

7 Press [3, 4] to select the setting

and press [ENTER].

Icon examples: Surround speaker (LS)

If the subwoofer is set so that no sound is output, the front

speakers will automatically be set to support low-frequency

reproduction. Connect front speakers that can reproduce the bass

range below 100 Hz if you do not connect a subwoofer.

(Effective only when playing multi-channel discs)

For optimum listening with 5.1-channel sound, all the speakers,

except for the subwoofer, should be the same distance from the

seating position. If you have to place the center or surround

speakers closer to the seating position, adjust the delay time to

make up for the difference.

If distances d (from the center speaker) and f (from the surround

speakers) are the same as or greater than e (from the front

speakers), leave the delay time as “0”, the factory preset.

If either distance d or f is less than e, find the difference in the

relevant table and change to the recommended setting.

8 Press [3, 4, 2, 1] to select “ms”

and press [ENTER].

9 Press [3, 4] to adjust the delay time

and press [ENTER].

10 Press [3, 4, 2, 1] to select “Test”

and press [ENTER].

A test signal is output from one speaker at a time, starting

with the front left speaker and proceeding clockwise.

Front (L)_—)Center_—)Front (R)

: ;

Surround (LS)(—————=Surround (RS)

11 While listening to the test signal

Press [3, 4] to adjust the volume of

the center and surround speakers.

≥Adjust the volume of the center and surround speakers so

that they sound the same as the front speaker.

(The front speakers cannot be adjusted here.)

≥No signal is output for the subwoofer. To adjust its volume,

play something, then return to this screen and adjust as

desired.

12 Press [ENTER].

The test signal stops.

To finish the speaker setting

Press [3, 4, 2, 1] to select “Complete” and press [ENTER].

To set the speaker presence and size (a)

VOLUME

DIRECT TV REC

DVD

123

456

MANUAL SKIP

CANCEL

INPUT SELECT

SKIP

STOP

PAU SE

PLAY/x1.3

SLOW/SEARCH

FUNCTIONS

ENTER

DIRECT NAVIGATOR

TOP MENU

RETURN

SUB MENU

PROG/CHECK

HDD DVD

SD/PC

3,4,2,1

ENTER

FUNCTIONS

VIDEO Plus+

m s

d B

0.0

d Bd B

Complete

Test

d B

0.0

b a c

c a

(LS) (RS)

a c b c a

Multi-Channel Setting

SELECT

ENTER

RETURN

Center

Front (R)

Subwoofer

Front (L)

— Surround —

Select when the speaker supports low-frequency

(under 100 Hz) reproduction.

Select when the speaker does not support low-

frequency reproduction.

No sound is output from the speaker.

To set the delay time (b)

(only when the speakers are not placed equidistant from the

seating position)

d Center speaker

Difference Setting

Approx. 30 cm 1.0 ms

Approx. 60 cm 2.0 ms

Approx. 90 cm 3.0 ms

Approx. 120 cm 4.0 ms

Approx. 150 cm 5.0 ms

f Surround speakers

Difference Setting

Approx. 150 cm 5.0 ms

Approx. 300 cm 10.0 ms

Approx. 450 cm 15.0 ms

To adjust the speaker volume level (c)

7755-B.book 16 ページ２００４年７月２３日金曜日午前１１時５４分

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 79 80

Comments to this Manuals

No comments

Panasonic DMRE500H Operations Instructions Page 16

Comments to this Manuals

Related products and manuals for DVD players Panasonic DMRE500H