Panasonic DMREH69 Operations Instructions download pdf (Page 82)

RQT9385

Troubleshooting guide

VIERA Link doesn’t work.

¾ Check the HDMI cable connection. Check that “HDMI” is

displayed on the front display when the power for the main unit

is set to On.

¾ Make sure that “VIERA Link” is set to “On”. (> 66)

¾ Check the “HDAVI Control” settings on the connected device.

¾ Some functions may not work depending on the version of

“HDAVI Control” of the connected equipment. This unit supports

“HDAVI Control 4” functions.

¾ If the connection for the equipment connected with HDMI was

changed, or if there was a power failure or the plug was

removed from the household mains socket, “HDAVI Control”

may not work.

In this case, perform the following operations.

1 When the HDMI cable is connected to all equipment with the

power on, turn the TV (VIERA) on again.

2 Change the TV (VIERA) settings for the “HDAVI Control”

function to off, and then set to on again. (For more

information, see the VIERA operating instructions.)

3 Switch the VIERA input to HDMI connection with this unit,

and after this unit’s screen is displayed check that “HDAVI

Control” is working.

The operation on this unit (music playback etc.)

is interrupted.

¾ The operation on this unit may be interrupted when you press

buttons on the TV remote control that do not work for VIERA

Link functions.

To return all the settings other than the main ones

to the factory preset

¾ Select “Yes” in “Shipping Condition” in the Setup menu. All the

settings except for the ratings level, ratings password and clock

settings return to the factory preset. The timer recording

programmes are also cancelled. (> 67)

¾ Select “Yes” in “Default Settings” in the Setup menu. All the

settings other than the tuning settings, clock settings, country

settings, language settings, disc language settings, ratings

level, ratings password, remote control code, return to the

factory presets. The timer recording programmes are also

cancelled. (> 67)

¾ Press and hold [X CH] and [CH W] on the main unit until the

country setting screen appears. All the settings except for the

ratings level, ratings password, remote control code and clock

settings return to the factory preset. The timer recording

programmes are also cancelled.

To reset the ratings level settings

¾ While the disc tray is open, press [DRIVE SELECT] to select

the DVD drive, then press and hold [¥ REC] and [1] (PLAY) on

the main unit at the same time for 5 or more seconds.

To restore the unit if it freezes due to one of the

safety devices being activated

¾ Press and hold [Í/I] on the main unit for 10 seconds. (The

settings remain.)

VIERA Link

To reset this unit

EH6959EC-RQT9385-L_eng.book 82 ページ２００９年４月２７日　月曜日　午後３時５０分

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 88

Comments to this Manuals

No comments

Panasonic DMREH69 Operations Instructions Page 82

Comments to this Manuals

Related products and manuals for DVD players Panasonic DMREH69