Panasonic DMRES15 Operations Instructions download pdf (Page 34)

RQT8317

Copying from a video cassette recorder

You can record from equipment connected to the AV3, AV4, or

DV IN terminals on the unit.

• To connect to the AV4 terminals (Ô page 9)

• To connect to the AV3 or DV IN terminals (Ô below)

• You can also connect to the AV2 input terminal on the rear.

• Turn off the unit and other video equipment before connecting.

If the audio output of the other equipment is monaural

Connect to L/MONO on the AV3 input terminals at the front.

The S VIDEO terminal achieves a more vivid picture than the

VIDEO terminal.

Preparation

• Turn on the unit and connected equipment.

• Insert a disc (Ô page 16).

• Press [REC MODE] to select the recording mode.

• When recording a bilingual programme (Ô page 14).

• When the output signal from the external equipment is NTSC,

change “TV System” to “NTSC” in the Setup menu (Ô page 43).

This unit cannot record to discs containing both PAL and NTSC

signals.

• To reduce noise in input from external equipment, set “AV-in NR” to

“On” (Ô page 28).

• When recording from the unit’s DV IN terminal

Select the type of audio recording from “Audio Mode for DV Input”

in the Setup menu (Ô page 40).

When recording from DV equipment (e.g., digital video camcorder),

you can record audio/video recordings from DV tape only.

Programmes are recorded as a title while at the same time

chapters are created at each break in the images and the playlist is

created automatically.

When “DV Auto Rec” screen is displayed

1 While stopped

Press [FUNCTIONS].

2 Press [e,r] to select “To Others” and

press [ENTER].

3 Press [e,r] to select “DV Auto Rec”

and press [ENTER].

4 Press [w,q] to select “Rec” and press

[ENTER].

Recording starts.

When recording finishes

The confirmation screen appears. Press [ENTER] to finish DV

automatic recording.

To stop recording

Press [g]. The confirmation screen appears. Press [ENTER].

Note

• Only one piece of DV equipment (e.g., digital video camcorder) can

be connected to the unit via the DV IN terminal.

• It is not possible to operate the unit from the connected DV

equipment.

• The DV IN terminal on this unit is for use with DV equipment only.

(It cannot be connected to a computer, etc.)

• The DV equipment name may not be shown correctly.

• Depending on the DV equipment, the images or audio may not be

input properly.

• The date and time information on the tape of the DV equipment will

not be recorded.

• You cannot record and play simultaneously.

1 While stopped

Press [INPUT SELECT] to select the

input channel for the equipment you

have connected.

e.g., If you have connected to the AV3 input terminals, select

“AV3”.

2 Start play on the other equipment.

3 When you want to start recording

Press [* REC].

Recording starts.

• Using Flexible Recording (Ô page 17), you can record the content

of a video cassette (approx. 1–8 hours) to a 4.7 GB disc with the

best possible quality of recording without wasting disc space.

To skip unwanted parts

Press [h] to pause recording. (Press again to restart recording.)

To stop recording

Press [g].

INPUT

SELECT

* REC

e,r,w,q

ENTER

Numbered

buttons

RETURN

u,i

SUB MENU

REC MODE

FUNCTIONS

e.g.,

Australia and N.Z.

EXT LINK

AV3

DV IN

S Video

cable

Audio/video

cable

Comments to this Manuals

No comments

Panasonic DMRES15 Operations Instructions Page 34

Comments to this Manuals

Related products and manuals for DVD players Panasonic DMRES15