Panasonic DMREX72S User Manual download pdf (Page 68)

RQT9313

Changing the unit’s settings

(All factory default settings are indicated with underlined text.)

HDMI Settings

≥Press [OK] to show the following settings.

HDMI Video Format

You can only select items compatible with the connected

equipment. This setting normally does not need to be changed.

However if you are concerned about output picture quality, it may

be improved by changing the setting.

≥To enjoy High Quality Video up-converted to 1080p, you need

to connect the unit directly to 1080p compatible HDTV. If this

unit is connected to an HDTV through other equipment, it must

also be 1080p compatible.

[576i/480i] [576p/480p] [720p] [1080i]

[1080p] When setting video output to “1080p”, we

recommend using High Speed HDMI Cables that

have the HDMI logo (as shown on the cover) and

are less than 5 meters to prevent video distortion

etc.

[Automatic

] Automatically selects the output resolution best

suited to the connected television (1080p, 1080i,

720p, 576p/480p or 576i/480i).

Aspect for 4:3 Video

To play a 4:3 title when connected with an HDMI cable, set how

to show pictures on a 16:9 widescreen television.

[4:3

]

Picture output expands left or right.

[16:9]

Picture is output as original aspect with

side panels.

Digital Audio Output

[HDMI and Optical]

[Optical Only]

Select when this unit is connected to an

amplifier with an optical digital audio cable and

connected to a TV with an HDMI cable and

you want to enjoy the highest quality of audio

from discs (

VIERA Link

Set to use “HDAVI Control” function when connected with an

HDMI cable to a device that supports “HDAVI Control”.

[On

]

[Off] Select when you do not want to use “HDAVI Control”.

AV1 Output

Set according to the terminal of the connected TV.

Select “Video ( with component )” or “S Video ( with component )”

for component output (progressive output).

If this unit is connected with an HDMI cable, you cannot select

“RGB 1 ( without component )” or “RGB 2 ( without component )”.

[Video ( with component )

]

Select when a TV that can receive a composite signal is connected.

[S Video ( with component )]

Select when a TV that can receive an S Video signal is

connected.

[RGB 1 ( without component )]

Select when a TV that can receive an RGB signal is connected. If

you always would like to view the picture from the unit in RGB

signal, select this mode. The TV screen will automatically switch

to display the picture from the unit when the unit is turned on.

[RGB 2 ( without component )]

Select when a TV is connected that can receive an RGB signal. If

you would like to switch to display the picture from the unit only

when playback or viewing menus, select this mode.

AV2 Settings

Set to match the connected equipment.

≥Press [OK] to show the following settings.

AV2 Input

Set to “RGB / Video” or “RGB” when receiving or recording RGB

output from external equipment.

[RGB / Video

] [RGB] [Video] [S Video]

Ext Link

This setting cannot be made when the “TV System” is set to

“NTSC” (> 67).

[Ext Link 1] When a digital satellite receiver which transmits a

special control signal recordings via the 21-pin

Scart cable is connected.

Start and stop timings of recording are controlled

by the control signal.

[Ext Link 2

] When external equipment with a timer function is

connected.

When it turns on, recording starts.

When it turns off, recording stops.

Common Interface

This indicates how to cancel the broadcast scrambling, conduct a

card number inquiry when the broadcast cannot be received, CI

status, etc. (> 7, 9) Follow the on-screen instructions.

Others

Remote Control

Change the remote control code on the main unit and the remote

control (the two must match) if you place other Panasonic products

close together.

[DVD 1

] [DVD 2] [DVD 3]

Use “DVD 1”, the factory set code, under normal circumstances.

Press [

] to select the code (“DVD 1”, “DVD 2” or “DVD 3”)

and press [OK].

To change the code on the remote control

2 While pressing [OK], press and hold the numbered button

([1], [2] or [3]) for more than 5 seconds.

3 Press [OK].

∫ When the following indicator appears on the

unit’s display

The unit’s remote control code

Change the code on the remote

control to match the main unit’s

(> step 2).

Executing “Shipping Condition” in the Setup menu returns the main

unit code to “DVD 1”. Change the remote control code to 1

(> step 2).

Setup

Tuning

Remote Control

Press “” and “OK” together

for more than 5 seconds on the remote

control.

Disc

Picture

Note

DMREX72SEG-RQT9313-L_eng.book 68 ページ２００９年５月１９日　火曜日　午後６時２５分

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 87 88

Comments to this Manuals

No comments

Panasonic DMREX72S User Manual Page 68

Comments to this Manuals

Related products and manuals for DVD players Panasonic DMREX72S