Panasonic AJ-PCS060G User Manual download pdf (Page 18)

E-17

Formatting

You can delete all data on P2 cards.

3. Within 2 seconds, press the [START] button

The [COPY STATUS], [P2C], and [HDD] LEDs go out, and P2 card formatting begins.

Formatting is complete when the [P2C] LED flashes in orange.

Note:

While the [COPY STATUS], [P2C], and [HDD] LEDs are on in step 2, if you do not press the [START]

button within 2 seconds

(step 3), the P2 card will not be formatted. To format the card, repeat the

process from step 2.

Formatting P2 cards

Data cannot be recovered after formatting. Before formatting cards, make sure all the data may

safely be deleted.

Do not turn the unit OFF or eject P2 cards when the [P2C] LED is flashing.

This may damage the P2 card.

P2 cards cannot be formatted if the write-protect switch is set to PROTECT. Additionally, when P2

cards are inserted in the slot, you cannot adjust the write-protect switch to prepare them for formatting.

1. With the unit ON, insert a P2 card in the slot

2. Hold the [P2C] button for at least 2 seconds

The [COPY STATUS], [P2C], and [HDD] LEDs change as follows.

: LED lit : LED flashing

OR : orange

COPY STATUS

OR OR OR OR OR

−

: LED lit

OR : orange

You can cancel copying in progress as follows.

1. Hold the [CANCEL] button for at least 2 seconds

The [COPY STATUS], [P2C], and [HDD] LEDs change as follows.

2. Press the [POWER] button

Copying is canceled and the [COPY STATUS] LEDs go out.

Note:

Canceling copy automatically deletes copied data.

Canceling copy operations

COPY STATUS

OR OR OR OR OR

− −

Copying (continued)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 95 96

No comments

Panasonic AJ-PCS060G User Manual Page 18