Panasonic WV-NP1004 User Manual download pdf (Page 11)

Lens Mounting

Mount the lens by rotating it clockwise slowly. Then, connect the lens cable to the ALC lens connector of the camera.

Optional lens

Lens type Model number

ALC lens for 1/3 inch CCD cameras 2x varifocal (high resolution) WV-LZA62/2

Other lenses for 1/3 inch CCD cameras can be mounted on this camera. However, high resolution scanning of this camera

may not be fully used for full-scanning (1 280 x 960) or partial scanning (960 x 720).

It is recommended to use a dedicated high-resolution lens when shooting a dark subject with the aperture opened.

Focus adjustment

When shooting an object using an AF lens, the first adjusted focus may be out-of-focus depending on the focal depth of the

lens in use. In this case, focus on a darker object with the aperture open to prevent out-of-focus.

When "ABF" is selected for "BACK-FOCUS" on the SETUP menu (→ page 19), the camera can automatically focus on a subject

with the best available conditions even when the illumination changes.

• Under near-infrared light, the focus may be slightly out-of-focus than under visible light.

When the "BACK-FOCUS SETUP" page is displayed and "AUTO" or "PRESET" is selected for "C/L ←→ B/W" using the

operation buttons on the camera, the camera can focus on subjects both under near-infrared light and under visible light.

(However, the camera will not change the focus according to the illumination change when the focus had been adjusted

once.)

PUSH TO LOCK/EJECT

CS-mount lens (optional)

ALC lens connector

CS-mount: Less than 8 mm

Within φ 20 mm

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

Panasonic WV-NP1004 User Manual Page 11