Panasonic SC-VK71D User Manual download pdf (Page 29)

RQT7700

Timer operations

Using the timers

To cancel the timer

Press [rPLAY/REC] to clear the timer indicator from the display.

(The timer comes on at the set time everyday if the timer is on.)

To change the settings (when the unit is on)

To change the play/record times

Do steps 1, 2, 3 and 5.

To change the source or volume

1. Press [rPLAY/REC] to clear the timer indicator from the display.

2. Make changes to the source or volume.

3. Do steps 4 to 5.

To change the timer

Press [rPLAY/REC] to select the desired timer.

Every time the button is pressed:

RECPLAY

(off)

To check the settings

Press [CLOCK/TIMER] while the unit is on to select “rPLAY” or

“rREC”.

The settings are shown in the following order:

Play timer: start time→finish time→source→volume

Record timer: start time→finish time→source

To check the settings while the unit is off, press [CLOCK/TIMER]

twice.

If you use the unit after the timers are set

After using, check that the correct tape/disc are loaded before

turning the unit off.

Note

• If you turn the unit off and on again while a timer is functioning, the

finish time setting will not be activated.

• If you selected AUX as the source, when the timer comes on, the

unit turns on and engages “AUX” as the source. If you want to

playback or record from a connected unit, set that unit’s timer to

the same time. (See the connected unit’s instruction manual.)

The sleep timer

This timer turns the unit off after a set time.

While enjoying the desired source:

Press [SLEEP] to select the time (minutes).

Every time you press the button:

SLEEP 30

SLEEP 60 SLEEP 90 SLEEP 120

SLEEP OFF

To cancel the sleep timer

Press [SLEEP] to select “SLEEP OFF”.

To confirm the remaining time

Press [SLEEP] once.

The remaining time is shown for about 5 seconds.

To change the setting

Press [SLEEP] to select the new setting.

You can use the sleep timer in combination with the play/record

timer.

Make sure the unit is off before the play/record timer’s start time.

Note

The sleep timer will be turned off when you start recording.

The play/record timer

You can set the timer to come on at a certain time to wake you up

(play timer) or to record a radio station or from the aux source

(record timer).

The play and record timers cannot be used together.

Preparation:

• Turn the unit on and set the clock (A page 11).

• For the play timer, prepare the desired music source (tape/disc/

radio/aux), and set the volume.

• For the record timer, check the cassette’s erasure prevention

tabs (A page 28) and insert the tape in deck 2 (A page 28).

Tune to the radio station (A page 24) or select the aux source

(A page 34).

1 Press [CLOCK/TIMER] to select the timer function.

Every time you press the button:

CLOCK

Previous display

RECPLAY

rPLAY: to set the play timer

rREC: to set the record timer

2 ON time setting

(Within 7 seconds or so)

Press [

4] or [

3] to set the start time.

Press [CLOCK/TIMER].

3 OFF time setting

Press [

4] or [

3] to set the finish time.

Press [CLOCK/TIMER].

The start and finish times are now set.

4 Press [

rPLAY/REC] to display the timer indicator.

Every time you press the button:

RECPLAY

(off)

rPLAY: to turn the play timer on

rREC: to turn the record timer on

(The indicator doesn’t appear if the start and finish times or the

clock hasn’t been set.)

5 Press [

f] to turn the unit off.

The unit must be off for the timers to operate.

• Play timer: Play will start in the set condition at the set

time with volume increasing gradually to the

set level.

• Record timer: The unit comes on 30 seconds before the set

time with the volume muted.

PLAY/REC

CLOCK/TIMER

SLEEP

SKIP

RQT7700(29)1 5/17/04, 4:35 PM29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

Comments to this Manuals

No comments

Panasonic SC-VK71D User Manual Page 29

Comments to this Manuals

Related products and manuals for HiFi systems Panasonic SC-VK71D