Panasonic SCHT540 User Manual download pdf (Page 8)

RQT8596

Simple Setup

∫ Attaching to a wall

You can attach all of the speakers (except subwoofer) to a wall.

≥ The wall or pillar on which the speakers are to be attached

should be capable of supporting over 10 kg per screw. Consult a

qualified building contractor when attaching the speakers to a

wall. Improper attachment may result in damage to the wall and

speakers.

≥ When mounting the front speakers or surround speakers ([HT540]

front speakers only) to a wall, we recommend using a string (not

included) to prevent it from falling.

1 Attach the cover plate to the front speaker or surround speaker

([HT540] front speaker only).

2 Drive a screw (not included) into the wall.

3 Fit the speaker securely onto the screw(s) with the hole(s).

Reattaching the speaker cable to the stand

Remove the eight screws from the stand, and remove the speaker net.

2 Position the cable.

3 Attach the speaker net with the screws.

∫ Fitting speaker stands (not included)

[Except front speakers ([HT540] [HT990]) and surround speakers

([HT990])]

Ensure the stands meet these conditions before purchasing them.

Note the diameter and length of the screws and the distance

between screws as shown in the diagram.

≥ The stands must be able to support over 10 kg.

≥ The stands must be stable even if the speakers are in a high

position.

Speaker installation options

Preparation for front speakers and surround speakers

([HT540] front speakers only)

1 Remove the speaker cable from the stand.

2 Connect the cable (➜ page 7).

[HT540] 2 Cover plates

[HT990] 4 Cover plates

[HT540] 2 Screws

[HT990] 4 Screws

Release the cable

from the groove.

Screw

Tighten securely.

Cover plate

‰7.5 to 9.5 mm

5.0 to 7.0 mm

Wall or pillar

‰4.0 mm

In this position, the

speaker will likely

fall if moved to the

left or right.

Move the speaker

so that the screw is

in this position.

106 mm

200 mm

Center speaker

Surround speaker [HT540]

340 mm

Front speaker [HT540]

Front and surround speakers [HT990]

e.g.

Screw

Press the cable

into the groove.

Approx. 15 cm

Cable

Speaker stand

(not included)

Plate thickness plus

7 mm to 10 mm

e.g. Center speaker

5 mm, pitch 0.8 mm

Metal screw holes

For attaching to

speaker stands

60 mm

Assembling the speakers

8596En_p03-15.fm Page 8 Thursday, March 2, 2006 3:50 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Comments to this Manuals

No comments

Panasonic SCHT540 User Manual Page 8

Comments to this Manuals

Related products and manuals for Home cinema systems Panasonic SCHT540