Panasonic SKS-HT750 User Manual download pdf (Page 5)

En-

Getting to know Your Speaker Package

—Continued

Caution:

A mounting screw’s ability to support a speaker depends

on how well it’s anchored to the wall. If you have hollow

walls, screw each mounting screw into a stud. If there are

no studs, or the walls are solid, use suitable wall anchors.

Use screws with a head diameter of 3/8" or less and a

shank diameter of 1/8" or less. With hollow walls, use a

cable/pipe detector to check for any power cables or

water pipes before making any holes.

Leave a gap of between 1/4" and 5/16" between the wall

and the base of the screw head, as shown.

(We recommend that you consult a home installation

professional.)

STANDBY/ON indicator

Red: Subwoofer in standby mode

Blue: Subwoofer on

With the Auto Standby function, the SKW-750

automatically turns on when an input signal is

detected in Standby mode. When there’s no input

signal for a while, the SKW-750 automatically

enters Standby mode.

OUTPUT LEVEL control

This control is used to adjust the volume of the sub-

woofer.

LINE INPUT

This RCA input should be connected to the sub-

woofer pre out on your AV receiver, amp, or other

receiver with supplied RCA cable.

Note:

The Auto Standby function turns the subwoofer on when

the input signal exceeds a certain level. If the Auto

Standby function does not work reliably, try slightly

increasing or decreasing the subwoofer output level on

your receiver or amp.

1/4"–5/16"

Wall

Subwoofer (SKW-750)

■ Rear

To AC outlet

■ Front

SKS-HT750_En,Fr,Es.book Page 5 Thursday, July 19, 2007 10:03 AM

1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments

Panasonic SKS-HT750 User Manual Page 5

Comments to this Manuals

Related products and manuals for Home Theater Systems Panasonic SKS-HT750