Panasonic SICX User Manual download pdf (Page 182)

182 S-ICX (International) issued October 2000 S-ICX-50-700

Chapter 5. Key Telephone Features Section 700 - Operation

The System allows you to make both internal and external pages and announcements. Internal pages

are made via the System’s key telephone speakers. External pages are made through the speakers of

an external paging system connected to the System.

Paging calls can be answered from any extension using the Meet-Me Answer feature.

Operation

To make a page:

Meet-Me Answer

To answer a page using Meet-Me Answer:

Hardware Requirements

• External relays, amplifier, and speakers are required for external paging.

Considerations

• You can assign the paging access code to a one-touch or FF key. Beginning with Version 4.5 and

higher, the assigned FF key LED indicates whether the paging system is in use. If the paging

system is not in use when a page is originated, the FF key LED lights solid green on the

originator’s telephone. If someone in the paging group initiates a page, assigned FF key LEDs on

all other telephones will light solid red until the page has been terminated.

• If an external paging system has been connected, pages can be made to paging groups 0-9

through the external speakers. Voice paging can also be heard over the extensions in groups 0-9.

• An extension can belong to more than one paging group.

• Only one page may be performed at a time. If you attempt to make a page while another

extension is paging, you will receive a busy signal unless your system allows Paging Override.

• Beginning with Version 4.5 and higher, the paging system can be set to “timeout” if a page is

longer than a specified length of time (0 to 255 seconds). If this feature is set and the timeout

period has elapsed, the page originator’s handset will emit a Fast Busy Tone and the words

“Paging Time Out” will be displayed on the originating telephone’s display.

Action Result

1. Lift the handset or press the ON/OFF key. Intercom dial tone

2. Enter the Group Paging code (default = #).

3. Enter the number of the desired paging group (0-9).

4. Make your announcement.

5. Replace the handset or press the ON/OFF key.

Action Result

1. Lift the handset or press the ON/OFF key. Intercom dial tone

2. Enter the Meet Me Answer code (default = ##). Connected to specified party

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 326 327

No comments

Panasonic SICX User Manual Page 182