Panasonic CF-AX2 Operations Instructions download pdf (Page 22)

Handling and Maintenance

Useful Information

Note also that some application programs may not support the primary and secondary Portrait angle display. For

such programs, use the computer in primary or secondary Landscape angle.

z Automatic brightness adjustment

The computer is equipped with an automatic brightness adjustment function that adjusts the display screen based

on the ambient light sensor. You can configure the automatic adjustment function as follows.

A Click [Charm] - - [Change PC Settings] - [General] - [Screen] - [Adjust my screen brightness automatically].

A Click (Start) - [Control Panel] - [Hardware and Sound] - [Power Option].

B Click [Change plan settings] for the power plan currently used.

C Click [Change advanced power settings] and double-click [Display].

D Double-click [Enable adaptive brightness], make necessary settings, and click [OK].

Set each item to ON, and the brightness of the screen display will adjust automatically.

The ambient light sensor is located at the top of LCD.

The ambient light cannot be detected properly if this area is obstructed or dirty.

z Magnetic sensor

The magnetic sensor on the computer operates by detecting geomagnetism. Therefore, the magnetic sensor may

not function properly and it readings may be inaccurate, especially in the following environments.

• Inside or near steel structures such as buildings or bridges

• Inside or near automobiles, or near train power lines

• Near metallic furniture or appliances

• When the AC adaptor or other peripheral devices are brought closer to the computer

• Near magnets, speakers, or other objects with strong magnetic fields

The magnetic directions indicated by the magnetic sensor may not be accurate immediately after purchase or in

environments with poor magnetic fields.

In such cases, turn on the computer and move it as follows.

A Hold the computer so that its keyboard side is facing the ground and level.

B While keeping the computer level, rotate it 90 degrees or more clockwise.

C Tilt the computer 90 degrees or more so that the side of the computer tilts down.

CAUTIONCAUTION

z Hold the computer firmly when moving it. Strong shocks from dropping the computer may result in damage.

If drops of water or other stains get on the surface of the LCD panel, wipe them off immediately. Failure to do so may

result in staining.

To clean the LCD panel

Use the soft cloth included with the computer. (For further information, refer to “Suggestions About Cleaning the LCD

Surface” Î Reference Manual “Screen Input Operation”.)

To clean the touch pad

Wipe lightly with a gauze or other dry, soft cloth.

To clean areas other than the LCD panel and touch pad

Wet a soft cloth with water or a diluted kitchen cleanser (neutral), wring the cloth out thoroughly, and wipe the dirty area

gently. Using a detergent other than a neutral kitchen cleanser (e.g., a weak alkali cleanser) may adversely affect

painted surfaces.

CAUTIONCAUTION

z Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc.

Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to

the surface.

Maintenance

CF-AX2mk1(CPE02709YA)_OI_M.book Page 22 Wednesday, May 22, 2013 11:06 AM

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Comments to this Manuals

No comments

Panasonic CF-AX2 Operations Instructions Page 22

Comments to this Manuals

Related products and manuals for Laptops Panasonic CF-AX2