Panasonic CS-MKE12NB4U Operations Manual download pdf (Page 10)

OPERATION WITH THE REMOTE CONTROLLER

1. Automatic Operation

The air conditioner calculates the difference between the thermostat

setting and room temperature, and automatically determines the

mode to operate under cooling or heating. Then, the air conditioner

continuously operates under the mode selected at initial operation.

2. Manual Operation

Check that the circuit breaker on the power panel is

turned on.

Once mode is selected and the unit is preset by

following the steps below, you can have the air

conditioner automatically bring the room to the desired

temperature simply by pressing the ON/OFF operation

button.

STEP 1 Press the MODE selector button to .

STEP 2 Press the ON/OFF operation button.

To stop the air conditioner, press the ON/OFF operation

button again.

• To change the temperature setting; press the

temperature setting buttons and change the setting to

the desired temperature.

STEP 2

STEP 1

NOTE

Check that the circuit breaker on the power panel is

turned on.

If the automatic operation settings of the unit do not

meet your needs, press the setting buttons as

described below and change the settings as desired.

STEP 1 Press the MODE selector button

and select the desired mode.

For heating operation

For dehumidifying operation

For cooling operation

STEP 2 To start the air conditioner, press the ON/

OFF operation button.

STEP 3 Press the TEMP. setting buttons to change

the temperature setting to the desired

temperature.

Adjustable temperature range:

STEP 4 Set the FAN SPEED selector button to the

setting you want.

STEP 5 Press the FLAP button and set the airflow

direction as desired.

(Refer to “ADJUSTING THE AIRFLOW

DIRECTION” on page 13.)

To stop the air conditioner, press the ON/OFF

operation button again.

• When multiple indoor units are used and units in other

rooms are already operating, they will be set to the

same mode of operation as the operating indoor units.

• Choose the best position in the room for the remote

controller, which also acts as the sensor for room

comfort and transmits the operating instructions.

Once you’ve found this best position, always keep the

remote controller there.

• This appliance has a built-in 5-minute time delay

circuit to ensure reliable operation. When the

operation button is pressed, the compressor will start

running within three minutes. In the event of power

failure, the unit will stop.

STEP 2

STEP 1

STEP 3

STEP 4

STEP 5

NOTE

30 °C max.

16 °C min.

or 86 °F max.

60 °F min.

NOTE

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments

Panasonic CS-MKE12NB4U Operations Manual Page 10

Comments to this Manuals

Related products and manuals for Mobile air conditioners Panasonic CS-MKE12NB4U