Panasonic BT-3DL2550E User Manual

Operating InstructionsLCD Video MonitorSS0710AT0 -FJ @Printed in JapanVQT2U10ENGLISHModel No. BT-3DL2550PModel No. BT-3DL2550EBefore operating t

10Outline (continued)SIDE BY SIDEA signal split into video for left-eye and right-eye and arranged side by side is input from either SDI1 or SDI2 and

11DimensionsVideo monitor unitAC Adaptor10-M4,L=10mm Max46 (1.8)215 (8.5)60 (2.4)100 (3.9)200 (7.9)169 (6.7)100 (3.9)100 (3.9)116.5 (4.6)220 (8.7)196

12Controls and Their FunctionsTally lamp (Jpage 39, 53)The color of the tally lamp Indicates monitor status. Red tally or green tally displayed accord

13Controls and Their Functions (continued)INPUT button ( )Selects the signal input line.Each press of the button changes the lines in the following or

14Controls and Their Functions (continued)SDI terminal (BNC) *1*2IN1 : This is the SDI input terminal (compatible with HD/SD automatic switching).• In

15Controls and Their Functions (continued)GPI input terminal (D-SUB 9-pin) *1External control is possible by using a GPI signal.RS-232C terminal (D-SU

16Power Supply1. Connect the power cable to the AC inlet of the AC adapter.Use the supplied screw (for securing power cable)and the power cable hook t

17How to Use the On Screen MenuThe screen displays eight types of information: input signal status, picture/volume adjusting menu status, sharpness di

18How to Use the On Screen Menu (continued)• Press the ADJUST button (J page 13, ) to open the picture/volume adjusting menu.• To clear the display,

19How to Use the On Screen Menu (continued)• This is the menu display.• It disappears after 2 minutes of inaction.• You can change position of the dis

2indicates safety information.WARNING:• To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.• To reduce the

20How to Use the On Screen Menu (continued)• Use the menu to display and set closed caption display for VIDEO (NTSC) signals. It also allows you to se

21How to Use the On Screen Menu (continued)1. Press [ADJUST] to display the picture/volume adjusting menu.2. Press [ , ] to select item to adjust.The

22User DataYou can save and load up to five combinations of menu settings and picture/volume adjustments as user data. You can also return settings an

23Main MenuMenu configurationMAIN MENUVIDEO CONFIG *1SYSTEM CONFIGFUNCTION *1INPUT SELECT *1GPI *1MARKERGAMMA SELECTCOLOR SPACE COLOR TEMP.SHARPNESS M

24Main Menu (continued)Underlined values indicate factory defaults.3DSub menu Setting DescriptionSYSTEM3D2DSwitches between 2D and 3D<2D> Sets m

25Main Menu (continued)Not available in the split-screen display of the “TWO WINDOW” function or COMPARISON in 3D mode. (CROSS HATCH is not affected.)

26Main Menu (continued)*1 Remote control via RS-232C ends in error (error response: ER001) when “GPI PRESET1” or “GPI PRESET2” is selected with the GP

27Main Menu (continued)_ 16:9 marker(Displayed for HD input and SD input in 16:9 ratiomode.) This marker is only displayed as a vertical bar. The sec

28Main Menu (continued)_ “CROSS HATCH”The “CROSS HATCH” function enables display of markers at regular vertical and horizontal intervals to facilitate

29Main Menu (continued)Underlined values indicate factory defaults.*1Changes are not reflected to a still image in the main window in the split-screen

3Read this first! (for BT-3DL2550P) (continued)FCC NOTICE (USA)IMPORTANT SAFETY INSTRUCTIONS1) Read these instructions. 2) Keep these instructions. 3)

30Main Menu (continued)*1 These functions are not available when “RGB-COMP.” under “YPBPR/RGB” or “DVI-COMP.” under “DVI-D” is selected in the “INPUT

31Main Menu (continued)_ WB adjustment modeSelect “VAR1” to “VAR3” for “COLOR TEMP.” in the “VIDEO CONFIG” menu to make “WHITE BALANCE VAR1” to “WHIT

32Main Menu (continued)Underlined values indicate factory defaults.*1 When the monitor is shipped, settings for “USER1” - “USER5” are identical to “FA

33Main Menu (continued)_ CALIBRATIONThe CALIBRATION function in this unit measures LCD panel characteristics from low to high brightness values and in

34Main Menu (continued)_ CALIBRATIONSelect CALIBRATION in the “SYSTEM CONFIG” menu to open the following menus.*1 “EXECUTING” is displayed during “AUT

35Main Menu (continued)Underlined values indicate factory defaults.*1 Changes in settings change menu settings. FUNCTIONSub menu Settings DescriptionF

36Main Menu (continued)Sub menu Settings DescriptionFUNCTION 1 - FUNCTION 5<3D INPUT TYPE> Selects the input type in 3D mode.SIMUL J LINE BY LIN

37Main Menu (continued)_ FUNCTION setting restrictionsSettings are not available under the following conditions. Setting Conditions that disable opera

38Main Menu (continued)_ Functions and operating status displayed on screen when FUNCTION buttons are pressedPressing any of the [FUNCTION1] to [FUNCT

39Main Menu (continued)“GPI CONTROL” is used to enable and disable GPI functions and assign functions to each of the GPI terminal pins (J page 53). Un

4Read this first! (for BT-3DL2550E)indicates safety information.AC AdapterThe rating plate is on the underside of the AC Adapter.Operating precautionO

40Main Menu (continued)Underlined values indicate factory defaults.*1 All five input lines (VIDEO, SDI1, SDI2, YPBPR/RGB, DVI-D) cannot be turned off.

41Main Menu (continued)_ COMP. Set “RGB-COMP” under “YPBPR/RGB” in the “INPUT SELECT” menu and select the “RGB-COMP.” input line to enable the “COMP”

42Main Menu (continued)Use the following submenus to set headphone output and audio level meters. Underlined values indicate factory defaults.*1 When

43Main Menu (continued)Underlined values indicate factory defaults.*1 Available during HD-SDI input signals. Displays the signal input from SDI1 (L) w

44Main Menu (continued)_ TWO WINDOW function The “TWO WINDOW” function displays two inputs selected from VIDEO, SDI1/2, YPBPR/RGB or DVI-D in two wind

45Main Menu (continued)_ TWO WINDOW sizeThe “TWO WINDOW SIZE” setting in the “DISPLAY SETUP” menu determines the size of the main window and sub-windo

46Main Menu (continued)• Main window (HD) and sub-window (SD)• Main window (SD) and sub-window (HD)• When the main window and sub-window display video

47Main Menu (continued)_ TWO WINDOW screen syncIn single screen display, the TWO WINDOW screen is synchronized to the frame rate frequency of the inpu

48Main Menu (continued)Underlined values indicate factory defaults.*1 The menu can be displayed when the lock is engaged. Only “CONTROL/LOCAL ENABLE”

49Main Menu (continued)_ Setting limitations in 2D mode ( : available, : can be set, but function is disabled, -: not available)*1 This function is

5Read this first! (for BT-3DL2550E) (continued)indicates safety information.Caution for AC Mains LeadFOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CA

50Main Menu (continued)Input CHVIDEOSDI 1/2YPBPR RGB-VIDEORGB-COMP.DVI-VIDEODVI-COMP.Setting item SD HD SD HD SD HD SD HDAUDIOINPUT SELECTEMBEDED SELE

51Main Menu (continued)_ Setting limitations in 3D mode ( : available, : can be set, but function is disabled, -: not available)*1 This function can

52Main Menu (continued)Input CH SDI 1/2 DVI-VIDEODVI-COMP.Setting item HD HDDISPLAYSETUPTWO WINDOW SIZE---SUB INPUT SEL. - - -TIME CODEPOSITION FONT S

53REMOTE Specifications This monitor permits remote operation via GPI/RS-232C terminal. GPI screen items correspond to the following terminals. Use th

54REMOTE Specifications (continued)_ Priority of assigned functions• When both “MARKER1” and “MARKER2” are activated at the same time, “MARKER1” has p

55REMOTE Specifications (continued)_ Setting command*1 This command is enabled in single screen display in “TWO WINDOW” mode and in the main window in

56REMOTE Specifications (continued)*2 This command is enabled in single screen display in “TWO WINDOW” mode and in the main window and sub-window in s

57REMOTE Specifications (continued)Maintenance inspectionsMaintenance inspections through periodic and appropriate maintenance are essential to keep t

58Care and cleaning of the monitor• Clean the cabinet and protection panel by gently wiping it with a soft cloth. To remove stubborn soiling, use a cl

59Specifications_ Generalindicates safety information.Dimensions (W × H × D):599 mm × 440 mm × 220 mm(23-5/8 inches × 17-5/16 inches × 8-11/16 inches)

6Read this first! (for BT-3DL2550E) (continued)EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS1. Applicable standards and operating environment (BT

60Specifications (continued)_ Signal formats supported in 2D mode ( : Compatible, : Limited compatibility, -: Not compatible)*1 When 1035/59.94i sig

61Specifications (continued)_ Signal formats supported in 3D mode ( : Compatible, : Limited compatibility, -: Not compatible)*1When 1035/59.94i sign

MEMO62BT-3DL2550PE(VQT2U10)_E.book 62 ページ ２０１０年７月８日　木曜日　午後２時１２分

63MEMOBT-3DL2550PE(VQT2U10)_E.book 63 ページ ２０１０年７月８日　木曜日　午後２時１２分

EPanasonic CorporationWeb Site: http://panasonic.netPanasonic Solutions Company3 Panasonic Way, Secaucus, NJ 07094 Tel: 877-803-8492www.panasonic.

7CautionsAbout 3D Polarized Eyewear• Do not drop, exert pressure on, or step on the 3D Polarized Eyewear.• Be careful not to trap a finger in the hing

8Precautions for Use• The LCD screen is manufactured to precise specifications. Although over 99.99% of the pixels function normally, 0.01% of the pix

9OutlineThe BT-3DL2550P/E LCD monitor is a 64.8 cm (25.5 inch) full HD LCD display panel designed especially for broadcasting service and business use