Panasonic BT-LH2600WE User Manual download pdf (Page 31)

REMOTE Specifications (continued)

g Assignment of item priority levels

• When both “MARKER1” and “MARKER2” are ON at the same time, “MARKER1” has priority. However, when the

display aspect is 4:3, the “MARKER1” aspect is 16:9, and the “MARKER2” aspect is 4:3, “MARKER2” is

displayed. In this case, the “MARKER2” background is controlled.

• When “MARKER BACK HALF” and “MARKER BACK BLACK” are simultaneously activated, priority goes to

“MARKER BACK BLACK”.

• When two or more of the following items - “INPUT SEL. VIDEO”, “INPUT SEL. Y/C”, “INPUT SEL SDI1”, “INPUT

SEL. SDI2” and “INPUT SEL. YP

BPR/RGB” - are simultaneously activated, priority goes to the last item activated.

• When “GAMMA SEL. FILM” and “GAMMA SEL. STDIO/PST” are simultaneously activated, priority goes to

“GAMMA SEL. FILM”.

Refer to the following diagram and lower right table for the RS-232C terminal pin arrangement and connections.

Please contact the vendor for information about detailed systems which used the RS-232C.

g Connectors and signal names

Connector: D-SUB 9-pin (female)

Signal name

g Communication Conditions

g Command format

• Commands are 3 characters following STX, finally

adding ETX.

• Add a : (colon) after the command as required, and

add the data.

g Response formats

1. Setting command response

2. Query command response

3. Error response

Error code

ER001: Invalid command

ER002: Parameter error

RS-232C terminal

PC Side (Straight) BT-LH2600W Side

Pin number Signal Pin number Signal

1N.C. 1N.C.

2 RXD 2 TXD

RS-232C Terminal (9P) 3 TXD 3 RXD

4DTR 4DSR

5GND 5GND

6DSR 6DTR

7RTS 7CTS

8 CTS 8 RTS

9N.C. 9N.C.

RS-232C REMOTE operation method

number

Signal

name

Explanation

1 N.C. Not connected

2 TXD Transmission data

3 RXD Reception data

4 DSR Connected inside.

5 GND Ground

6 DTR Connected inside.

7 CTS Connected inside.

8 RTS Connected inside.

9 N.C. Not connected

Signal level Conforms to RS-232C

Synchro system Tone pace synchro system

Transfer rate 9600 bps

Parity None

Data length 8 bit

Stop bit 1 bit

Flow control None

STX (02h) Command : Data ETX (03h)

STX (02h) Command ETX (03h)

STX (02h) Data ETX (03h)

STX (02h) Error code ETX (03h)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37 38

Comments to this Manuals

No comments

Panasonic BT-LH2600WE User Manual Page 31

Comments to this Manuals

Related products and manuals for Monitors Panasonic BT-LH2600WE