Panasonic WJ-NV300 Installation Guide

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.The model number i

10AbbreviationsThe following abbreviations are used in this manual.Microsoft® Windows® 8 is described as Windows 8.Microsoft® Windows® 7 is described

11By registering the license of the additional business intelligent kit, the face matching function, that detects faces whose features are closed to t

12Adjust the height, angle of depression and vertical angular fi eld of view of the camera so that the angle between the camera •and face ("&quo

13Cases not suited for face matchingThe matching accuracy varies depending on installation, settings and adjustment of the camera, ambient environment

14Refer installation work to the dealer.Installation work requires technique and experiences. Failure to observe this may cause fire, electric shock,

15Power sourceThe input power source for this product is 120 V AC 60 Hz (WJ-NV300K), 220 V - 240 V AC 50 Hz/ 60 Hz (WJ-NV300K/G).Do not connect to the

16When this product is not supposed to be used for a certain periodTurn on the power (around once a week), and perform recording/playback to prevent i

17This product is designed to be used indoors.Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out

18Major operating controls and their functionsFront viewq Status indicatorsERROR: Blinks when an error that can become a prob-lem for the recorder to

19Step 1Open the SDHC/SD memory card slot cover.Step 2Insert a SD memory card to the slot until it clicks. Hearing a click means that the card is prop

2The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulat-ed "danger

20Rear viewq Power cord inlet [AC IN] Connect the provided power cord to this inlet. The power plug of the recorder is 2-prong plug equipped with a

21How to use the power cord plug bracePut the hooks of the power cord plug brace on the power cord inlet to fix the power cord plug.Power cord plug br

22User/Host managementIt is necessary to register users who operate the recorder and hosts (PC) that accesses the recorder via a network such as a LAN

23Operations flowzObtain the license (Registration Key)☞ Activation Key CardxConnection☞ Page 24cTurn on the recorder☞ Page 34vRegister the license (Re

24ConnectionConnection of camerasUp to 32 cameras can be connected to the recorder via a switching hub.Connect to the Camera/PC port of the recorder.U

25Connection of monitorsConnect a main monitor (to be used to display live images, recorded images or the setup menu) and a sub monitor (to be used to

26Connection of a PCConnect this recorder and a PC via a switching hub.When the PC and the camera are on the same network, connect the PC to the Camer

27When the PC and the cameras are not on the same network and it is impossible to directly access the cameras from the PC, connect the PC to the PC po

28Connection of extension unitsUp to 2 extension units (optional) can be connected with a single network disk recorder. Connect the recorder and the e

29How to use the terminals of the ALARM/CONTROL connectorThis connector is used when connecting an external device such as a sensor that outputs alarm

3FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.This appliance is supplied with a moulded three pin mains plug for your safety and convenien

30Connection for the auto time adjustment functionWhen a signal output from the other device is supplied to the time adjustment signal input (pin no.

31Alarm connectionWhen a signal output from the other device is supplied to the Alarm input 1 to 9 terminals (pin nos. 1 - 9), recording or an alarm a

32Before installing the hard disk drives, turn off the power of the recorder first. When replacing the hard disk drives, the procedures will be same a

33Step 4Insert the HDD bracket with the hard disk drive all the way into the HDD slot, and secure the HDD bracket with the screws removed in Step 2.HD

34Turn on the power of the recorderTurn on the power of the recorder. When using the recorder for the first time, register the license for the recorde

35Turn off the power of the recorderTurn off the power of the recorder. Follow the procedure below to turn off the power.Step 1During recording, "

36The setup menu will be displayed.Step 4Click [Advanced setup] - [Maintenance] - the [System man-agement] tab on the setup menu.The "System ma

37Step 5Click the [Setup >] button of [Registration of license].The registration window will be displayed.Step 6Click the [Registration >] but

38Step 3Click the [Setup] button.The top screen of the setup menu will be displayed.Note:If a setting window is in a list form and the [• C] button

39About the operation of on-screen keyboardUse the on-screen keyboard to enter characters for the setting items. When clicking the [ ] icon beside the

4Limitation of liabilityTHIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMI

40Configuration of each setting item in the setup menu should be completed in advance to use this recorder.The setup menu has the following levels for

41[Date]Set the current date. Select the year, month and day from the calendar.[<<Y]/[Y>>] button: Selects the previous or next year.[<

42Step 6Click the [Next] button.IP address will be given to the cameras newly con-nected, replaced or added, and the images from the camera will be

43Undetectable: Cannot obtain images from the camera.Authentication error: Failed in the authentication to dis-play images from the camera.Important:I

44Before asking for repairs, check the symptoms with the following table.Contact your dealer if a problem cannot be solved even after checking and try

45Symptom Cause/solution Ref. pagesThe "Thermal error" indication is displayed on the main monitor.Check if the fan is malfunctioning.• 18C

46• GeneralPower source: 120 V AC 60 Hz (WJ-NV300K) 220 V - 240 V AC 50 Hz/60 Hz (WJ-NV300K/G)Power consumption: 55 W (when 2 HDDs (4TB) are instal

47CD-ROM* ...1 pc.Mouse ...

Information for Users on Collection and Disposal of Old Equipment and used BatteriesThese symbols on the products, packaging, and/or accompanying docu

5Important safety instructions1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use

6ContentsLimitation of liability ...

7PrefaceFeaturesThe network disk recorders WJ-NV300K and WJ-NV300K/G (hereinafter, recorders) are designed for use within a surveillance system, and r

8System configurationAbout the user manualsThere are 4 sets of operating instructions for the WJ-NV300K, WJ-NV300K/G as follows.Installation Guide (thi

9System requirements for a PCIt is recommended to operate this product using a PC that meets the following system requirements.OS: Microsoft® Windows