Panasonic TH65PF9EK User Manual download pdf (Page 41)

Normalization

When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote

ID” adjustments, set all the values “Off” so that all the buttons are enabled again.

Press the button on main unit together with button on the remote control and hold for more than 5 seconds.

The “SHIPPING” menu is displayed and the lock is released when it disappears.

2/3

Options

Off

Remote ID

Serial ID

ID select

Button lock

Remocon User level

Item Effect Adjustments

Button lock

Off MENU&ENTER On

Off: All the buttons at the bottom of the main unit can be used.

MENU & ENTER:

Locks

and

ENTER/

buttons on bottom face of main unit.

On: Locks all the button on bottom face of main unit.

Remocon

User level

Off User1 User2 User3

Off: You can use all of the buttons on the remote control.

User1:

You can only use , , , , , , , buttons on the remote

control.

User2:

You can only use

, , buttons on the remote control.

User3:

Locks all the buttons on remote control.

ID select

Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.

Set value range: 0 - 100

(Standard value: 0)

Remote ID

Off On

Off: Disables ID remote control functions. You can use normal remote control operations.

On: Enable ID remote control functions.

Serial ID

Off On

Sets the panel ID Control.

Off: Disables external control by the ID.

On: Enables the external control by the ID.

Item Effect Adjustments

Slot Power

Off Auto On

Off: Power is not transmitted to the slot power.

Auto: Power is transmitted to the slot power only when main power is on.

On: Power is transmitted to the slot power when main power is on or in the standby state.

Note: In some cases, power is transmitted to the slot power when main power is on or in the

standby state regardless of the slot power setting.

V.Installation

Off On

Off: Sets fan to the horizontal installation mode.

On: Sets fan to the vertical installation mode.

Notes:

• This functions when display is turned on.

• Turn up the power switch for the upward direction when you set Display vertically.

Rotate

Off On

Off: Does not rotate the image.

On: Rotates the image 180 degrees.

Serial Slot

Select

Slot1 Slot2 Slot3

Selects the slot which communicates serial.

Note:

The setting of an external command can be set only from the ﬁ xed serial terminal (see page 10).

3/3

Options

Off

V. lnstallation

Rotate

Slot1

Serial Slot Select

Slot power

Options Adjustments

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments

Panasonic TH65PF9EK User Manual Page 41

Comments to this Manuals

Related products and manuals for Plasma TVs Panasonic TH65PF9EK