Panasonic WV-CS580 Operations Instructions

Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.The model number is

10 AUTO : This setting, by moving the shutter automatical- ly when necessary, provides a clearer picture  ofextremelybrightobjectsoutdo

11Note: •The following are the differences between AUTOandFIX. AUTO :Selecting X32 AUTO, for example,automatically increases sen

12Note:•With some monitors and VTR models, output of a camera images in the black and white mode will not display a proper image unless a burst sig

13Notes:•Ifzoomlimitissettomorethan36x,thenzoomoperationpausesat36xmagnification.•Increasingthezoomtoover36xmagnification(d

14Pan/tilt settingsn Using the Pan/Tilt Setup Menu Display the pan/tilt setup menu from the setup menu to configure pan and tilt settings. First,disp

152. PresstheCAM(SET)button. This will display the scene file setting menu. The following items can be set on the Scene file set

16Notes: •The HOME setting should be selected when youwant to normally leave the camera in the home position and occasionally perf

17 4. Move the cursor to DWELL TIME, and then tilt the joystick left or right to select the start point and end point dwell time setting.

18 Notethatthetotalpatroltimeistwominutes,andthetime allowed for each routine depends on the number of patrol routines that are config

19 7. Use the joystick to point the camera at the location to bemasked,andthenpresstheCAM(SET)button. This registers the camera posit

2CONTENTSPreface ...3RS485 setup ...

20ThedirectionindicatorsareN(north),NE(northeast),E(east), SE (southeast), S (south), SW (southwest), W(west),andNW(northwest). 1.

21 5. Repeat steps 1 through 4 for the other area numbers,ifyouwant(2to8).Note: • The area title is always displayed under the

22Alarm settingsn Using the Alarm Setup Menu Display the alarm setup menu from the setup menu to configure alarm settings. First,displaythealarmse

23Note:•Size and speed limitations are relaxed somewhatwhen the contrast ratio between the background and the moving object is large.

243. Move the cursor to ALARM IN 2, and then tilt thejoystick left and right to select the operation the camera should perform

25Special settingsn Using the Special Setup Menu Display the special setup menu from the setup menu to adjust picture quality. First,displaythespe

26 (3) ThisreturnstothePIXOFFmenu.  Anasterisk(*)totherightofaPIXOFFnumberindicates that the number has a blemish compensat

27Password settingsn Password Lock Settings Set the password lock on the setup menu. l Turning Password Lock ON and OFF The password lock function can

283. MovethecursortoNEWPASSWORD and press the CAM (SET) button to display the passwordsetting menu. The password input screen

29ShortcutsShortcutsaresupportedwhenyouareusingthesystemcontrollerthathasaCAMFUNCTIONbutton.Withshortcuts,you can configure camer

3About the user manualsThere are 2 sets of operating instructions for the WV-CW590/G, WV-CW594E, WV-CS580/G, WV-CS584E as follows. • InstallationGu

30 Controller Operation Setting [1]+[7]+[0]+[CAMFUNCTION] IRIS:CLOSE[1]+[7]+[1]+[CAMFUNCTION] SHUTTER:ON[1]+[7]+[2]+[CAMFUN

http://panasonic.netImporter's name and address to follow EU rules:Panasonic Testing CentrePanasonic Marketing Europe GmbHWinsbergring 15, 22525

4RS485 setup The following procedure is to configure the RS485 setup when using the system controller to control the camera(pan,tilt,

5About the setup menus This manual describe procedures for operating system controller WV-CU650.All setting configuration procedures start from the se

6n Scene Select SettingsDisplay the scene select setting menu from the setup menutoconfigurescene selectsettings.First, displaythe sce

7 2. Move the cursor to →PUSHSETtotherightofPAN/TILT, and then press the CAM (SET) button todisplaythePAN/TILTsettingmenu. 3. Us

83. Use the joystick to move the cursor the character you wanttoinput,andthenpresstheCAM(SET)button.  The text input procedure is th

9Camera settingsn Using the Camera Setup Menu Display the camera setup menu from the setup menu (Advanced Menu) to configure camerasettin