Panasonic Arbitrator 360 Operations Instructions

Operating Instructions1009K0 -MENGLISHVQT2D94Back-End Administrator (Back-End Application) Model No. AG-JJLBE20P• Microsoft and the Microsoft logo, W

10Description of the Screen Displays (continued)11Update Screen Front-End Update tabFor displaying the screen for updating the Front-End application.(

Error Messages (continued)100101No. Message Measure16110 Failed to get the machine information.Acquisition of the information failed. Verify with the

100Error Messages (continued)101No. Message Measure54060 Failed to get the password information.Acquisition of password information failed. Verify wit

Error Messages (continued)1010No. Message Measure40020 Fail to get the group information. Acquisition of the group list failed. Verify with the admi

10Error Messages (continued)10No. Message Measure51010 Too many registered data. The number of registered data exceeds the specified value. Decrease

Error Messages (continued)1010No. Message Measure53010 The period until E-mail is transmitted is too long. The maximum terms that can be set are 30

10Error Messages (continued)10No. Message Measure55240 IP address cannot be registered any further.The number of registered IP addresses exceeds the

Error Messages (continued)1010No. Message Measure— Cannot set the same preset. Set different preset.A different preset setting has been made with an

10Error Messages (continued)10Messages Common to the Front-End ApplicationNo. Message MeasureE00410Invalid update file was found.The update file on

Error Messages (continued)1010No. Message MeasureE00462Two or more update files were found.Multiple update files were found on the USB memory device

10Error Messages (continued)10No. Message MeasureE02442Write Protect cards found.Couldn't format.Disable SDHC Memory Card write-protection.E024

1011Description of the Screen Displays (continued)Front-End Update screenWhen the Front-End Update tab on the Update screen is clicked on, the Front-E

Error Messages (continued)110111No. Message MeasureE15759Unformatted Card found on slot1. Record cannot be started.An unformatted SDHC Memory Card has

110Error Messages (continued)111No. Message MeasureE22420Officer’s information file cannot be loaded.The officer data file (WID*****.TXT) is corrupted

Error Messages (continued)1111No. Message MeasureE28202 Export was completed.Restore file remained.Restore the file not yet restored, and export it

11Error Messages (continued)11Messages Common to the Back-End Client ApplicationNo. Message Measure1000 Failed to update due to illegal data. Pleas

Error Messages (continued)1111SubmessagesThe messages shown below are displayed together with the messages with code number 1000 and higher, like 10

11Error Messages (continued)11No. Message127 Failed to modify the GPIO information.128 No GPIO information exists.129 Failed to transfer the file.13

Error Messages (continued)1111No. Message307 Failed to add the group.308 The registration number of group is exceeded.309 Failed to update the group

11Error Messages (continued)11No. Message724 Failed to delete the machine.725 Failed to delete the machine group.726 Failed to delete the machine so

11Combination of cameras depends on the cameras connected to the recorder. Available combination is as shown below.Selectable combination of cameras

Panasonic Computer Solutions Company50 Meadowlands Parkway, Panazip 2F-5,Secaucus, NJ 07094© 2009P

1Description of the Screen Displays (continued)1Back-End Update screenWhen the Back-End Update tab on the Update screen is clicked on, the Back-End

11Description of the Screen Displays (continued)Recorder Update screenWhen the Recorder Update tab on the Update screen is clicked on, the Recorder

1Description of the Screen Displays (continued)1Recorder Setting Update screenWhen the Recorder Setting Update tab on the Update screen is clicked o

11Description of the Screen Displays (continued)Users Screen Users ListFor displaying the User ID and name registered to the Back-End Server. Right-

1Description of the Screen Displays (continued)1Groups Screen Groups ListFor displaying the list of group name and group note registered in the Back

11Description of the Screen Displays (continued)Rules Screen Rule TreeFor displaying the rules registered in the Back-End Server in tree format. Rig

1Description of the Screen Displays (continued)1Classify Screen Classify ListFor displaying the list of the Classify tag registered in the database.

11Description of the Screen Displays (continued)Conguration Screen Drive setting tabFor displaying the drive setting screen for setting the destina

ContentsOverview ... 4Back-End System Construction ... 4Multi-Server System ..

0Description of the Screen Displays (continued)1Drive setting screenWhen the Drive setting tab on the Cong screen is clicked on, the drive setting

01Description of the Screen Displays (continued)Log setting screenWhen the Log setting tab on the Cong screen is clicked on, the log setting screen

Description of the Screen Displays (continued)Schedule setting screenWhen the Schedule setting tab on the Cong screen is clicked on, the schedule

Description of the Screen Displays (continued)Password setting screenWhen the Password setting tab on the Cong screen is clicked on, the password

Description of the Screen Displays (continued)DB/Network setting screenWhen the DB/Network setting tab on the Cong screen is clicked on, the data

Description of the Screen Displays (continued) IP Address Settingⓓⓒⓐ ⓑⓓⓒFor setting the IP address. Front-End IP AddressFor displaying the IP add

Startup and TerminationStarting up1. Turn on the PC. 2. Double-click on the Back-End Administrator icon on the desktop. The Login screen is disp

 Startup and Termination (continued)TerminatingClick on the close button at the upper right on the Main screen. The application is terminated, and

OperationsUpdatingThe Back-End Administrator application can remotely update the Front-End application and Memory Card Video Recorder, as well as

 Operations (continued)Deleting PC on which Front-End application is running1. Select PCs to be deleted on the Front-End Application list. 2. Cl

Contents (continued)Setup ... 83Admin Password ... 83Alloc

0Operations (continued)1Registering the Back-End Administrator or Back-End Client applicationOnly one version of the Back-End Administrator and Back

01Operations (continued)Updating the rmware of the Memory Card Video RecorderThe rmware of the Memory Card Video Recorder is updated via wired or

Operations (continued)Registering rmwareOnly one version of the rmware can be registered in the Back-End Server. When a new version is registere

Operations (continued)Updating the recorder settingsThe conguration settings for the Memory Card Video Recorder can be updated via LAN or Wireles

Operations (continued)3. Enter the name of settings to be created in the Recorder Setting Name eld. 4. Select a category to be set on the Item

Operations (continued)Deleting the Memory Card Video Recorder settings1. Click on [Settings]. The Recorder Setting screen is displayed. 2. Selec

Operations (continued)Description of the Record Group screen ①②③ Group Name: Enter the group name. Vehicle ID and Group List: Vehicle ID and thei

Operations (continued)Deleting a group 1. Select a Memory Card Video Recorder with the Group to be deleted on the Recorder Setting Update screen.

Operations (continued)Memory Card Video Recorder Conguration Setting ScreenNoteThe default settings for various items are shown on the Setup list

Operations (continued)Allocation (Video/Audio) screen⑤① ③ ④② Resolution/RecordRateⓐⓑ MainThe resolution and bit rate of the main video can be set

OverviewAn AG-JJLBE20P Back-End Administrator application is a Windows application to operate videos registered in the Back-End Server.Back-End Syst

0Operations (continued)1 Preset SettingsⓑⓐFor setting the channel mode and camera connection pattern for Preset 1, Preset 2, and Preset 3.(See “Cam

01Operations (continued)Camera1 screen① ② Camera1Perform the settings for the color camera that is connected to the [CAMERA 1] connector on the Mem

Operations (continued) Init Camera1 Settings after power ONⓐⓑⓒⓓⓔThe status of the color camera when it is turned on can be set. Init BacklightSe

Operations (continued)Date/Time screen① ② ③ ④ ⑤ Time ZoneSet the time zone.Setting values:Hawaii Standard TimeYukon Standard TimeYukon Daylight Sa

Operations (continued)File Transfer screen①②③ Uploadⓐⓑ Auto Upload is EnabledAutomatic uploading is enabled when a check mark is placed in the b

Operations (continued)Network screen①②③④ Streamingⓐⓑⓒ Server IP Address ListSet the IP Addresses of the Back-End Server for streaming. Up to 5 I

Operations (continued) Recorder (USB WIRELESS LAN)ⓐ ⓑ ⓒ ⓓⓔ ⓕ ⓖⓗⓘThe settings for the USB wireless LAN port on the Memory Card Video Recorder that

Operations (continued)Embedded OSD screen①② Embedded OSDⓐⓑⓒ MainSelect if the Embedded OSD is displayed on the main video or not. Setting values:

Operations (continued)Radar/GPS screen① ② ③ Radarⓐⓑⓒ Connection of RadarSelect if a radar gun is connected to the Memory Card Video Recorder or n

Operations (continued)Rec/Play screen①④ ⑤ ⑥② ③ Recⓐⓑⓒⓓⓔⓕⓖⓗⓙⓘ PreRec Time (Video) [s]Select the pre-recording time for video. Setting values: 0, 1

 Overview (continued)Multi-Server SystemThe Back-End system has multiple servers that are independent of one another, and one Back-End Server has it

0Operations (continued)1 Auto Power OFFⓐⓑⓒⓓ Power Off Time [min]Select the time required from the ACC is turned off up to the Memory Card Video Rec

01Operations (continued) Init Settings after power ONⓐⓑ Init Preset SelectSelect a preset applied when the Memory Card Video Recorder is turned on.

Operations (continued)Registration screen①② ③ Meta Denitionⓐⓑⓒ Meta DenitionSelect the type of meta denition to be registered to the Memory Ca

Operations (continued)Exporting from the Front-End application is not available at present. Upgrading is scheduled for the future. Li

Operations (continued)Triggers screen①②③,④ TriggerSet if the GPI trigger function is used or not. Setting values: ON, OFF Trigger 1-Trigger 16ⓐ

Operations (continued)Registering UsersUser registration as an administrator or an ofcer is required for use of the Back-End Administrator or Bac

Operations (continued)Description of the Property screen ①②③④⑤⑩⑨ ⑪ ⑫ ⑬⑥⑦⑧ ID: Enter the user ID used on logging in. Upper- and lower-case letters

Operations (continued)Right listThe rights shown in the table below can be set on the Right List of the Property screen. Right DescriptionImport A

Operations (continued)Adding a user using Active Directory The user can be registered to the Back-End Server by retrieving the user information fr

Operations (continued)Displaying and editing the user information1. Click on [Property].The Property screen appears, and the registered user info

Overview (continued)Operating EnvironmentA PC that meets the following operating environment is required for use of this application: CPU: Intel Core

0Operations (continued)1Deleting the user1 Select a user to be deleted on the User List. 2. Click on [Delete].A conrmation dialog box is displaye

01Operations (continued)Exporting usersUser information and group information registered in the database will be exported to external media, and sto

Operations (continued)Registering GroupsWhen users are grouped, rights are given to multiple users at one time. If different rights are given to a

Operations (continued)Displaying and editing the group information 1. Click on [Property]. The Property screen appears, and the group information

Operations (continued)Setting Evidence RulesAn evidence rule is a function to determine access permissions, retention period, and storage location

Operations (continued)Adding a rule1. Click on [Add]. The edit rule screen appears. 2. Enter the rule name in the Rule Name eld. 3. Make setti

Operations (continued)Description of edit rule screen ⑦①③④⑤⑥⑫⑰⑭⑬⑮②⑧⑨⑩⑪⑱⑲⑳⑯ Rule Name: Enter a rule name. Disable rule: If checked, the rule is di

Operations (continued)Description of Evidence Rule User AddForm screen① ② ③ ④ Users: A list of users stored in the Back-End Server is displayed. G

Operations (continued)Deleting a rule1. Select a rule to be deleted on the Rules screen. 2. Click on [Delete].A conrmation dialog box is displa

Operations (continued)Setting Classify InformationClassify is the function to add classify tag and classify note to the video. Videos can be searc

Installing/UninstallingInstallingInstalling the Back-End Administrator applicationTo install the Back-End Administrator application, the Back-End Ser

01System SetupWhen you click on the [Cong] button on the Main screen, the system setup screen appears. Apply buttonAll settings changed on each set

0 1 System Setup (continued)Drive SettingSet folders in which videos are to be registered. Click on the Drive setting tab. The Drive setting screen

 System Setup (continued) 6. Click on [OK]. The Register folder dialog box is closed, and the Library is updated. Deleting a folder1. Select a f

 System Setup (continued)Unprocessed video settingWhen the video is veried and unprocessed, it will be saved to the Unprocessed Video Folder, the

 System Setup (continued) Log SettingSetting for log output is made. Click on the Log setting tab. The log setting screen appears. Operation log s

 System Setup (continued)Front-End Application/Recorder Log settingThe location and capacity restriction for storing the user operation log of the

 System Setup (continued) Schedule SettingSetting for scheduling of batch processing executed at the specied time is made. Click on the Schedule

 System Setup (continued)Alert SettingIf videos are not uploaded exceeding the specied days, the alert e-mail is sent to the specied group. Sett

 System Setup (continued) Setting the PasswordSet the password policy. Click on the Password setting tab. The Password setting screen appears. Set

 System Setup (continued)Setting of password defaultWhen the “Login to Back-End using your operating system login.” check box is checked, the logi

Installing/Uninstalling (continued)UninstallingUninstall the Back-End Administrator application following the procedures below. Procedures for Window

0 System Setup (continued) 1Setting the Database and NetworkThe database and network settings can be made.Click on the DB/Network setting tab. The D

01 System Setup (continued)Conrming the port settingsPort settings for the items below will be displayed. Back-End Server DestinationThe port numbe

 System Setup (continued) Setting the IP addressThe IP address for communicating with the Memory Card Video Recorder or Front-End application is dis

SetupAdmin PasswordPerform video and audio settings. Item Factory-Preset DescriptionAdmin Password For inputting an administrator password.Password

Setup (continued)Item Factory-Preset DescriptionPreset1*1Preset 1 can be set.Form 1 Channel The channel mode can be set.Setting values: 1Channel,

Setup (continued)Item Factory-Preset DescriptionPreset2*1Preset 2 can be set.Form 1 Channel The channel mode can be set.Setting values: 1Channel,

Setup (continued)Item Factory-Preset DescriptionPreset3*1Preset 3 can be set.Form 2 Channels The channel mode can be set.Setting values: 1Channel,

Setup (continued)Camera 1Camera 1 settings can be performed.Item Factory-Preset DescriptionCamera 1 Settings for the color camera connected to the

Setup (continued)*1 The setting upon the last power-off will be restored when the camera is turned on. If the Memory Card Video Recorder is not t

Setup (continued)Date/TimeThe date and time can be set. Item Factory-Preset DescriptionDate/Time Date, time, and time zone settingsTime Zone Easte

Main ScreenDescription of the Screen DisplaysToolbarWhen one of the buttons is clicked on, the screen for the corresponding function will open.① ②③ ④

0Setup (continued)1File TransferFile transfer settings can be performed.Item Factory-Preset DescriptionUpload Upload settingsAuto Upload is EnabledU

01Setup (continued)NetworkThe network settings can be performed.Item Factory-Preset DescriptionStreamingIP Address - IP address setting for the Back

Setup (continued)Embedded OSDThe settings for Embedded On-Screen Display can be performed.Item Factory-Preset DescriptionEmbedded OSD Setting of w

Setup (continued)Radar/GPSSettings related with a radar gun and GPSItem Factory-Preset DescriptionRadar Settings related with a radar gun*1Connect

Setup (continued)Rec/PlayThe settings related with recording and playback can be performed.Item Factory-Preset DescriptionRec Recording-related se

Setup (continued)*1 Depending on the settings on the Video Allocation screen, some items may not be displayed.*2 The setting upon the last power

Setup (continued)RegistrationVarious data can be registered. Item Factory-Preset DescriptionMeta Denition Administrator Select the type of meta d

Setup (continued)TriggersThe trigger signals (GPI1-16) can be set. ItemFactory-PresetDescriptionTrigger ON Set if the GPI trigger function is used

Error MessagesMessages for the Back-End Administrator ApplicationNo. Message Measure90000 Failed to update due to illegal data. Please confirm th

Error Messages (continued)No. Message Measure11430 This version has already been registered.The updater module is of the same version as that alre