Panasonic CS-MKS12NKU Operations Manual download pdf (Page 47)

ADJUSTING THE AIRFLOW DIRECTION

1. Horizontal The horizontal airflow can be adjusted by moving the vertical vanes with your

hands to the left or right.

When the humidity is high, the vertical vanes should be in the front

position during the cooling or dehumidifying operation. If the vertical

vanes are positioned all of the way to the right or left, condensation may

begin to form around the air vent and drip down.

2. Vertical The vertical airflow can be adjusted by moving the flap with the remote controller.

Do not move the flap with your hands. Confirm that the remote controller has

been turned on. Use the FLAP button to set either the sweep function or one of

the six airflow direction settings.

• The flap automatically closes when the unit is off.

• Use the FLAP button on the remote controller to adjust the position of

the flap. If you move the flap by hand, the flap position according to the

remote controller and the actual flap position may no longer match. If

this should happen, shut off the unit, wait for the flap to close, and then

turn on the unit again; the flap position will now be normal again.

• Do not have the flap pointed down during cooling operation.

Condensation may begin to form around the air vent and drip down.

CAUTION

A. Sweep function

The flap starts moving up and down to

deliver air over the sweep range.

C. Auto flap function

The flap is set to the recommended

position.

B. Setting the airflow manually

Referring to the above illustration, use the

FLAP button to set the airflow direction

within the range used during the cooling or

dehumidifying operation.

COOL

DRY

FAN

SWEEP

NOTE

CAUTION

1 2 ... 42 43 44 45 46 47 48 49 50 51 52

No comments

Panasonic CS-MKS12NKU Operations Manual Page 47