Panasonic ECOi 2 Way Installation Manual download pdf (Page 21)

Fig. 3-6

Remove 2 screws

Tubing cover

Bottom

Front

Remove 11 panel

screws from front

panel

Use cutting pliers or similar

tool to cut cover out

Fig. 3-5

Indentation

(4 locations)

Slit hole

3-3. Routing the Tubing

● The tubing can be routed out either from the front or from the bottom. (Fig. 3-6)

● The connecting valve is contained inside the unit. Therefore, remove the front panel. (Fig. 3-6)

(1) If the tubing is routed out from the front, use cutting pliers or a similar tool to cut out the tubing outlet slit (part indicated

by ) from the tubing cover. (Figs. 3-5 and 3-6)

(2) If the tubing is routed out from the bottom, remove the

slit part ( ).

● Use a drill bit approximately 13/64" dia. to create holes at

the 4 slit hole indentations (openings).

● Punch out the slit part ( ).

● Be careful not to damage the base plate.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

No comments

Panasonic ECOi 2 Way Installation Manual Page 21