Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.The model number i
[Precautions for use]This product is designed to be used indoors. This product is not operable outdoors.This product has no power switch.When turning
AVC Patent Portfolio LicenseTHIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH
Precautions for installationInstalling placeContact your dealer for assistance if you are unsure of an appropriate place in your particular environmen
Major operating controlsFront view FRONTOPENLOCKCamera mount bracket (accessory)LOCKWV-SC385OPENSafety wire(fixed with the mount bracket)CameraDecor
Rear viewMONITOR OUTAUDIO OUTMIC/LINE INEXT I/O4 3 2 112V INPOWERINITIALSETACTLINK10BASE-T/100BASE-TXSafety wire holderMonitor out connector for
Installations/ConnectionsThis camera is designed to be installed on a ceiling.Before starting the installation/connection, prepare the required device
Wire through a hole in the ceiling Step 1Fix the camera mount bracket (accessory) with four optional fixing screws (M4 or M6, option).There
Specification of cable (wire): AWG #22 - #28, Single core, twistedImportant: • Donotconnect2wiresormoredirectlytoaterminal.When i
Important: • When mounting thecamera onto thecamera mountbracket, hold the base part of the camera. Mounting the camera while holding the m
• 12 V DC power supply terminal q Loosen the screw of the power cable plug (accesso-ry). w Connect the output cable to the power cable plug. Str
The lightning flash with arrowhead sym-bol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangero
Wire without making a hole in the ceilingStep 1Install the camera by following step 1 and steps 3 - 8 of the "Wire through a hole in
Place the camera upside-down on a desktop without fixing SC385Use it as a simple desktop device at meetings and on other occasions.Place the camera on
WV-Q154S (option)Embedded box(locally procured)CameraAnchor bolt (locally procured)Anchor bolt (locally procured)Roof spaceSafety wire angleSafety wir
Safety wire angleAnchor boltSafety wireWV-Q105 (option)Mounting screws (4 pcs, WV-Q105 supplied)WV-Q156S (option)Ceiling board such as plaster boardCa
Connection exampleWhen connecting with a PC directly<Required cable>LAN cable (category 5 or better, cross, STP*)* PAL model onlyWhen connecting
Step 4Rotate the camera counterclockwise to detach the cam-era from the camera mount bracket (accessory). Important: • Whendetaching thecamera
Insert/remove an SDHC/SD memory cardHow to insert an SDHC/SD memory cardImportant: • BeforeinsertingtheSDHC/SDmemorycard,turnoffthepowerof
How to remove the SDHC/SD memory cardImportant: • BeforeremovingtheSDHC/SDmemorycard,select"Notuse"for"SDmemorycard"
Configure the network settingsInstall the softwareBefore installing the software, refer to the readme file on the provided CD-ROM first. Software incl
Step 1Start the Panasonic IP setting software by double-clicking the "EasyIpSetup.exe" icon on the provided CD-ROM.The License Agreement
ContentsImportant safety instructions ...
TroubleshootingBefore asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after ch
Symptom Cause/solutionReference pagesLive indicator keeps on blinking orange approx. in 2 seconds intervals.•UPnPTM error has occurred since the pow
Symptom Cause/solutionReference pagesCannot access the camera.•AreyouaccessingthewrongIPaddress? Check the connection as follows With the
About the live indicatorThe live indicator will light or blink as follows depending on the camera status. Operation status Indicator statusWhen the po
Specifications• BasicPower source: 12 V DC, PoE (IEEE802.3af compliant)Power consumption: WV-SC385: 12 V DC*: 1 A, PoE 48 V: 12 W/230 mA (Class 0 d
Auto slow shutter: Off (1/30 s), max. 2/30 s, max. 4/30 s, max. 6/30 s, max. 10/30 s, max. 16/30 sColor/BW (SC385): On/ Off/ AUTO1/ AUTO2/ AUTO3Simp
Resolution (SC384): Aspect ratio: 4:3 H.264 1280x960/ VGA(640x480)/ QVGA(320x240), max. 30 fps MPEG-4 VGA(640x480)/ QVGA(320x240), max. 30 fp
Standard accessoriesInstallation Guide (this document) ...1 pc.Warranty card (NTSC model only) ...
38Information for Users on Collection and Disposal of Old Equipment and used BatteriesThese symbols on the products, packaging, and/or accompanying do
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) D
For U.S. and Canada:Panasonic System Communications Company of North America,Unit of Panasonic Corporation of North Americawww.panasonic.com/business
Limitation of liabilityTHIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING
Main functionsH.264/MPEG-4 and JPEG triple encodingH.264/MPEG-4 stream and JPEG (MJPEG) outputs can be simultaneously provided.* Either H.264 or MPEG-
About the user manualsThere are 2 sets of operating instructions for the WV-SC385, WV-SC385PJ, WV-SC384 (NTSC model), WV-SC385E, WV-SC38
Trademarks and registered trademarks • Microsoft,Windows,WindowsVista,InternetExplorer,ActiveXandDirectXareeitherregisteredtrademarksor
PrecautionsRefer installation work to the dealer. Installation work requires technique and experiences. Failure to observe this may cause f
Comments to this Manuals