Panasonic STG30LE User Manual download pdf (Page 12)

Getting your SSD ready for use

The storage tray (> 14, 15) on the back of this unit is removable. Before using this unit, open the storage tray

and install an SSD.

≥ An SSD is not supplied in the package you have purchased. Purchase an SSD that are commercially available.

≥ For information on the handling of the SSD, refer to “SSD” (> 29).

∫ Supported SSDs

This unit supports 2.5-inch SATA SSDs with a thickness of up to 9.5 mm. (Limited to those with a driving

voltage of 5 V.) It is not possible to connect PATA SSDs, 1.8-inch SSDs, SSDs with ZIF connectors, SSDs with a

driving voltage of 3.3 V, or specially-shaped SSDs (built-in SSD of an ASUS Eee PC, etc.).

For details, check the website below.

www.technics.com/support/

Have the following supplied items ready:

≥ Screws (M3

k 4, silver) ........................................................................................................................... 4

Follow the steps below to install the SSD.

1 Rotate the fixing screw on the back of this unit to loosen it.

2 Hold both ends of the storage tray to pull it out straight.

Turn the storage tray over with the bottom side facing up, and attach the new SSD.

≥ Be careful about the orientation of the SSD and storage tray.

Storage tray

(Bottom)

SSD (label side)

SSD (gold contacts)

ST-G30L-SQT1342_mst.book 12 ページ２０１６年２月２９日　月曜日　午前１１時１４分

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

No comments

Panasonic STG30LE User Manual Page 12