Panasonic Arbitrator 360 Installation Manual download pdf (Page 5)

E-4

ENGLISH

4. Installation of the P2 Software

<Notes>

z Install the P2 software after logging into

the personal computer under a user

name that has administrator status.

z We recommend that installation of the

software be started with the P2 devices

to be used, connected to the personal

computer.

When the P2 devices are connected to

the personal computer, Windows

Explorer will additionally display the same

number of drives as device card slots for

these devices.

When no drive is displayed in Windows

Explorer, check that the USB2.0 driver

provided by Microsoft is installed in the

personal computer.

z The P2 card driver needs to be installed

for each card bus slots. If you are using a

personal computer that has two or more

card bus slots, insert the P2 card into

every slot.

The driver may not be installed for any

slot into which the P2 card is not inserted,

causing the P2 card to operate

improperly. If the PC does not recognize

the inserted P2 card, then try re-inserting

it.

z If the OS is Windows 2000/Windows XP

Professional, installation of the software

may fail when the driver signature option

in Windows is set to “Block”.

If the installation fails, select the

Hardware tab in the “System Properties”

window in Control Panel and check that

the driver signature option for the driver is

not set to “Block”.

z If a dialogue box not described in this

manual appears during installation of

the software, click “Cancel” to close

the box.

z When a device such as the P2 card is

connected to the personal computer

before the driver is installed, the

following dialogue box appears. Be

sure to click “Cancel” to close the box.

Figure 1

(Fo r Wi ndow s 20 00 /

Windows XP Professional)

Figure 2

(For Windows Vista Business)

P2Installer(VQT0L24-8)_E_F_C_J.book 4 ページ２００８年２月１２日　火曜日　午後１時５０分

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments