PNQW1623ZA DC1208SY0 Setting upBase unitL Use only the supplied Panasonic AC adaptor PQLV219.CHARGE FOR ABOUT 7 HOURSHandsetCharger(120 V AC, 60 Hz
– 2 –Operating tipsNavigator key/Volume key (VOL., ?)NScrolling through lists or items By pressing this key ({^} or {V}) repeatedly, you can scroll th
– 3 –Basic operationsMaking/Answering calls (Base unit/Handset)Making calls Base unit: Dial the phone number. i Lift the corded handset, or press {SP-
– 4 –Frequently asked questionsQuestion Cause/solutionWhy is w flashing? LThe handset is too far from the base unit. Move closer.LThe base unit’s AC a
– 5 –Quick troubleshooting“No link. Reconnect base AC adaptor.”Remove the batteries for 10 seconds from the handset, and then insert the batteries int
– 6 –Quick troubleshootingLift up the handset from the charger.Press {C} at the handset, then check if the display shows “Talk”.Check if the telepho
– 7 –Registering a handset to the base unitThe supplied handset and base unit are pre-registered. If for some reason the handset is not registered to
– 8 –IMPORTANT!If your product is not working properly ...1 Reconnect AC adaptor to the base unit.4 Read FAQ in this Quick Guide andtroubleshooting pa
Comments to this Manuals