Panasonic WV-CP504 User Manual download pdf (Page 12)

When the SUPER-D5 function is set to "OFF": OFF (1/60) (default), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, and

1/10 000

When the SUPER-D5 function is set to "ON" or "ON(i-VMD)": OFF (1/60) (default), 1/100

Note:

 • When"ALC/ELC"issetto"ELC"or"ALC+"(+page9),"---"appearsandtheelectronicshutterfunctioncannotbeactivated.

 • Ifthecontroller,WV-CU254orWV-CU204isused,SWLEDandthestatusof"SHUTTER"arenotcorrectlydisplayed.

4. Gain control setting [AGC]

Selectagaincontrolsettingfromthefollowing.

ON (HIGH) (default)/ON (MID)/ON (LOW):Automaticallyincreasesthegaintomakethescreenbrighterwhentheilluminanceof

thesubjectbecomesdarker.

  HIGH,MIDandLOWindicatethegainlevel.

OFF:Doesnotincreasethegain.

Note:

 • When"SENSUP"issettotheAUTOmode,“AGC”cannotbesetto“OFF”.

5. Electronic sensitivity enhancement setting [SENS UP]

Useofthe electronicsensitivityenhancementfunction increasesthequantityof lightstoredonthe CCD,andaccordinglythe

imagebecomes brighter.Themagnification is unchangedforselection of FIX, andthe magnification is changeablein accor-

dancewiththeilluminanceofaphotographicsubjectforselectionofAUTO.

Themagnificationoftheelectronicsensitivityisselectablefromthefollowing.ThesettingoftheSUPER-D5functionrestrictsthe

availablesettingrange.

When the SUPER-D5 function is set to "OFF":OFF(default)/X2AUTO/X4AUTO/X6AUTO/X10AUTO/X16AUTO/X32AUTO/

OFF/X2FIX/X4FIX/X6FIX/X10FIX/X16FIX/X32FIX

When the SUPER-D5 function is set to "ON" or "ON (i-VMD)":OFF(default)/X2AUTO/X4AUTO/X6AUTO/X10AUTO/X16

AUTO/X32AUTO

Note:

 • When"ALC/ELC"issetto"ELC"or"ALC+"(+page9),or"SHUTTER"issetto"1/100"(+page11),onlytheAUTOmodeis

enabled.

 • When"SHUTTER"issetto"OFF"orotherthan"1/100",theelectronicsensitivityenhancementsettingcannotbeperformed.

"---"appearsand"OFF"isselected.

 • It is impossible to select "AUTO" for "SENS UP" and "1/100" for "SHUTTER" using the following system controller. Use the

operationbuttonsforthesetting.

  WV-CU300,WV-CU354,WV-CU204,WV-CU254

 • Whenthemagnificationof"SENSUP"isincreased,thescreenbecomescoarser,morewhitish,ormoreflawed.However,this

phenomenonisnormal.

 • Ifthecontroller,WV-CU254orWV-CU204isused,SWLEDandthestatusof"SENSUP"arenotcorrectlydisplayed.

6. White balance setting [WHITE BAL]

Thewhitebalanceadjustmentisselectablefromthefollowing.

ATW1 (default):Activatestheautomaticcolortemperaturetrackingmode.Thecameracontinuouslymeasuresthecolortem-

peratureofthelight sourceand automaticallyadjusts the whitebalance.The adjustment ofthe color temperatureranges

fromapprox.2700Kto6000K.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 34 35

No comments

Panasonic WV-CP504 User Manual Page 12