Panasonic WV-NF284 User Manual download pdf (Page 31)

When using AC/DC power supply

• Is AC 24 V or DC 12 V power supply

connected to the power cord termi-

nal?

→ Confirm the cable is firmly con-

nected.

When using a PoE device for power

supply

• Are the PoE device and the network

connector on the mounting side of

the camera connected using a LAN

cable (4-pair)?

→ Confirm the cable is firmly con-

nected.

• Depending on the PoE device, the

power supply will stop when the

demanded power exceeds its total

power limit for all PoE ports.

→ Refer to the operating instruc-

tions of the PoE device in use.

21 - 22

Cause/solution

Troubleshooting

Before asking for repairs, check the symptoms on the following table.

Contact your dealer if a problem cannot be solved even after checking and trying the solution

or if the problem is not described below.

The power cannot be

turned on.

Page

Symptom

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

No comments

Panasonic WV-NF284 User Manual Page 31