Panasonic WV-NP472 User Manual

(Lens : option)SDIIday/nightBefore attempting to connect or operate this product,please read these instructions carefully and save this manual for fut

-10-Power-in ConnectionsNotes:• Use only a class-2 power supply suitable to thevoltage and current required by the camera. Seespecifications.• Use a U

• Connection to Intranet (Type 2)• Connection to Internet (Type 3)• Connection to Internet (Type 4)-11-ALARM INALARM OUTAUX OUTDAY/NIGHT INGNDABVIDEO

-12-OPERATING THE CAMERAYou can operate the camera in two ways: from the PCby way of network, or locally from the camera or systemdevice. Access from

• Function Comparison / PC Network vs. Camera site-13-4. Set the following parameters.Note: Ask your system administrator about param-eters if you are

-14-PRIOR TO SETUPThis section describes setup procedures common toaccesses from the PC and from the camera. The PCcan control more functions than cam

-15-7. Move the cursor to CAMERA O, and click theENTER button. CAM SETUP opens. Notes: • Refer to the next page for setup operations.• Return the menu

-16-The following pages describe setting operations from the camera. For accessing from the PC, interpret these instructions as follows.SETTING PROCED

-17-To edit the CAMERA ID1. Move the cursor to CAMERA ID.The factory default setting is OFF.2. Press I. The CAMERA ID menu appears. Thecursor on the

-18-2-2. ALC Mode with SUPER-D2 OFF and ELCModeNote: If ELC is selected, set MASK SET according tothis procedure.1. Move the cursor to SUPER-D2 and se

-19-5. Electronic Sensitivity Enhancement (SENS UP)There are two modes for SENS UP.AUTO: If you select X10 AUTO, for example, thesensitivity is automa

-2-WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be exposedto dripping

-20-Manual Fine Adjustment for AWC (ATW)You can set the white balance items manually.1. To set MASK SET, proceed as described in steps 2to 4 of “ALC m

-21-10. Special MenuThis menu lets you adjust and set up the video signal ofthe camera to meet your requirements.Move the cursor to RET in the bottom

-22-To reset to the factory settings (CAMERA RESET)1. Move the cursor to CAMERA RESET. PUSH SW ishighlighted.2. While holding down L and M, hold down

-23-SETUP FROM THE PCPREPARATIONS FOR THE PC ConnectionsPrior to connections, specify the connection type andprepare relevant devices and cables.Note

-24- Network Setup of the PCTo set up the network of the PC, first change the TCP/IPsettings of the PC to match them to the default settingsof the ca

-25-6. Click “Internet Protocol (TCP/IP)”, and then clickthe [Properties] button.7. Click the “Use the following IP address” radio but-ton and enter t

-26-3. Click the Setup Menu button. The User Setup win-dow appears.• Enter “admin” in the user name column.• Click the OK button. Network Setup Param

-27-Connection type 2 IP address Set the IP address designated by your network administrator.However, the setting is not required if DHCP is used in a

-28-Secondary server Set the IP address of DNS when using the DNS server.Refer to your internet Internet service provider for the IPaddress of the DNS

-29-Host name Refer to your Internet service provider and set the designatedhost name if required.DNS Set to ON when using the DNS server.Primary serv

-3-IMPORTANT SAFETY INSTRUCTIONS1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use th

-30-CAMERA SETUP FROM THE PCThe camera setup menus overlaid on the camera pic-ture appear by clicking the Camera Setup button in themain page. You wil

-31- Camera Setup MenusMenu windows are shown in this page. Refer to page16 for menu operations.

-32-Setup windows listed below are accessible only fromthe PC. Operations in these windows are described inthe following pages.Click any of the setup

-33-3. E-Mail Notice Setup• Select ON or OFF for E-mail Notice.ON: Sends an e-mail when an alarm operates.OFF: Does not send.• Enter the e-mail server

-34-• Enter a file name and click a radio button.Fix: Uses repeatedly a single file name whenoverwriting new data.Date & Time: Creates and attache

-35- Host SetupNote: Never turn over the order: start with the host reg-istration, and then proceed to the authenticationON/OFF.1. Open the Host Setu

-36-You can reset the following data back to the factorydefault settings.Camera SetupSetup Menu (PC oriented)HTML files Initializing the Camera Menu•

-37-VIEWING PICTURES Image Quality Selection1. Click the Setup Menu button in the main page.The Network Setup window opens.2. Click the Image button

-38- Monochrome ModeYou can switch the camera between the color modeand black-and-white mode. This may help picturebecome clear under conditions of i

-39-When an alarm sounds, the camera performs outputfunctions depending on the setup.Inputs: • The alarm sensor connected to the ALARM IN ter-minal on

-4-CONTENTSIMPORTANT SAFETY INSTRUCTIONS ... 3PREFACE ... 5Feat

-40- Canceling Alarm Display“Alarm” display in the upper right corner will disappearwhen you operate the following.• Click the Return button after on

-41-Transparency: Indicates a non-masked area thathas been incorporated into the detection area.Blink: Indicates a non-masked area when the cur-sor is

-42-3. The selected picture is displayed, and the alarmimage control panel appears on the bottom of thescreen. The title of the control panel is follo

-43-AUXILIARY OUTPUT CONTROL Auxiliary Output ControlYou can turn on or off the connected device, for exam-ple a lamp that is connected to the AUX OU

SymptomNo picture is displayed.-44-TROUBLESHOOTINGHTML documents are not displayed.• Is the AC adapter firmly plugged in to the outlet?• Are the POWER

-45-SPECIFICATIONSGeneralAmbient Operating Temperature: –10 °C - +50 °C (14 °F - 122 °F)Ambient Operating Humidity: Less than 90 %Power Source and Pow

-46-STANDARD ACCESSORIESBody Cap ... 1 pc.ALC Lens Connector (YFE4191J100)

N1002-1112 3TR001281BAB Printed in JapanPANASONIC CANADA INC.5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010PANASONIC

-5-Features• 10/100BASE-T terminal enables your PC to viewcamera images via the network.• SD II (super dynamic) system allows a wide rangeof 46 dB whi

-6-1. The installation should be made by qualifiedservice personnel or system installers.2. Do not attempt to disassemble the camera.To prevent electr

tiyouq w erWV–NP472ALARM INALARM OUTAUX OUTDAY/NIGHT INGNDABVIDEO OUTRCVLINK10BASE-T/100BASE-TXPOWERDC 12VIN!3!4!2!1!0-7-MAJOR OPERATING CONTROLS AND

-8-• Mounting the LensNotes:• Using the lens having improper protrusion willdamage the camera. The protrusion of the lens intothe camera body should b

-9-• Flange-back AdjustmentThe adjustment is required only when a lens withoutfocus-adjusting mechanism is mounted, or when a lenswith adjusting mecha