Panasonic NA-140VS4 Operations Instructions download pdf (Page 26)

26 - Maintenance

Maintenance

Joints

Tap

Water-supply hose

about

50 °C

Cleaning the water-supply

filter

Clean the filter if water is not supplied

properly.

Turn the tap off.1.

Switch on the appliance.2.

Select the Cotton programme, and 3.

then press the Start button.

After 1 minute, switch off the 4.

appliance. Water has drained out of

the water-supply hose.

Disconnect the water-supply hose 5.

from the appliance.

Clean the filter, which is on the rear 6.

of the appliance.

Use a small brush, for example, a

toothbrush.

If the unit is supplied with the hose 7.

fitted with a water-supply valve, turn

off the tap supplying the appliance,

disconnect the hose from the tap,

and then clean the filter on hose in

the same way.

Reconnect the water-supply hose.8.

Tighten the plastic joint firmly.

Turn on the tap, then check for leaks.9.

Preventing a frozen

water-supply hose

If the appliance is delivered in freezing

weather conditions, after setting up, leave

it at room temperature for 24 hours before

using. This will ensure that the

water-supply hose does not get clogged up

with ice.

If your water-supply hose freezes, perform

the following procedures:

Wrap warm towels around the joints 1.

of the water-supply hose.

Add 2 to 3 litres of warm water to the 2.

drum.

Start washing with the Drain only 3.

function, using the Mode button. (See

page 22.)

NA-140VS4_English.indb 26 2012-12-27 13:12:15

1 ... 25 26 27 ... 44

Comments to this Manuals

No comments