Panasonic NA107GC1 Operations Instructions download pdf (Page 29)

• Water supply hose

Caution

- Do NOT connect the water supply hose to a

combination tap.

- Do NOT twist, squash, modify, or cut

the hose.

- Optimum mains water pressure is 0.1 -

1.0 MPa. If the water pressure exceeds

this value, install a pressure reducing valve.

- Waterflow from the tap should be more than

5 L/min.

Connecting the water supply hose

1. Attach one end of the hose to the water

inlet on the back of the appliance and tighten

the joint by hand.

2. Attach the other end of the hose to the

tap and tighten it the same way.

3. Open the tap slowly and make sure that

there are no leaks around the joints.

The joints are subject to water pressure.

Leak-proof System

The appliance is installed with a system

that is designed to prevent water leaks.

The system includes the following components:

1) Aquastop system

If a water leak is detected in the water inlet hose,

the system stops supplying water automatically. This system is

only functions with hoses with water supply valves.

2) Overflow detection

If water in the appliance increases to a certain level, this

function stops the water supply and activates the drain pump.

CHAPTER -3: INSTALLATION

(WATER SUPPLY HOSE CONNECTION)

3/4”

10mm

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 75 76

No comments

Panasonic NA107GC1 Operations Instructions Page 29