Panasonic SC-SP100 User Manual download pdf (Page 10)

RQTX1009

ENGLISHESPAÑOLENGLISH

Using other equipment

Preparation

• Ensure that the iPod or iPhone is not connected to the main unit.

• Ensure that the other equipment is completely set up and its volume

reduced before connecting to the main unit.

Audio cable (included)

Portable audio equipment

(not included)

Rear view

Connect the other equipment such as a portable audio equipment, etc.

to the MUSIC PORT using the supplied audio cable.

While the iPod or iPhone is connected to the main unit, you can

transfer data from the PC using the USB connectivity.

USB cable (not included)

Rear view

1 Connect the USB cable to the USB port of the main unit

and PC.

Refer to iPod or iPhone User’s Manual on PC synchronisation.

2 Before disconnecting the USB cable, make sure the

procedure of safe eject of hardware from the PC is

performed.

Recording and operating problems may occur on some computer

systems.

Please note that Panasonic and Panasonic dealers cannot be held

liable for any lost data or other direct or indirect damage except in

cases of intentional or gross negligence.

Connecting to the PC

Avoid interfering with other Panasonic equipment

You can operate this unit using a different mode.

The main unit and remote control must be set to the same mode.

1 Press and hold [SURROUND] on the main unit and

[BASS] on the remote control for at least 3 seconds.

The power indicator ﬂ ashes 3 times conﬁ rming the change.

2 Press and hold [OK] and [BASS] on the remote control

for at least 2 seconds.

To return to the default mode, repeat the above steps. For step 2,

replace [BASS] with [MUTE].

RQTX1009-1R_gb_es_pl_cz_ru_ua.in10 10RQTX1009-1R_gb_es_pl_cz_ru_ua.in10 10 7/2/09 5:48:34 PM7/2/09 5:48:34 PM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

No comments

Panasonic SC-SP100 User Manual Page 10