Panasonic KXTG5422 Operations Instructions download pdf (Page 48)

Useful Information

48 For assistance, please call 1-800-211-PANA (7262).

Troubleshooting

General use

Programmable settings

Problem Cause & solution

The unit does not work. L Make sure that the battery is installed correctly (page

10).

L Check the connections (page 9).

L Fully charge the battery (page 11).

L Clean the charge contacts and charge again (page 11).

L Unplug the base unit’s AC adaptor to reset the unit.

Reconnect the adaptor and try again.

L Re-install the battery (page 10) and fully charge it.

The display shows “No

link to base. Move

closer to base, try

again.” and an alarm

tone sounds.

L The handset is too far from the base unit. Move closer

and try again.

L Plug in the base unit’s AC adaptor.

L Raise the base unit antennas.

L If the above remedies do not solve the problem, the

handset may have lost communication with the base

unit. Register the handset again (page 40).

I cannot hear a dial tone. L Confirm that the telephone line cord is connected (page

9).

L Disconnect the unit from the telephone line and connect

a known working telephone. If the working telephone

operates properly, contact our service personnel to

have the unit repaired. If the working telephone does

not operate properly, contact your telephone company.

Problem Cause & solution

I cannot program items. L Programming is not possible while the handset is being

used.

L Do not pause for over 1 minute while programming.

L Move closer to the base unit.

While programming, the

handset starts to ring.

L A call is being received. Answer the call and start again

from the beginning after hanging up.

TG5421_5422_5423(e).book Page 48 Thursday, January 13, 2005 1:51 PM

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 63 64

Comments to this Manuals

No comments

Panasonic KXTG5422 Operations Instructions Page 48

Comments to this Manuals

Related products and manuals for Answering machines Panasonic KXTG5422