Panasonic ERSB60 Operations Instructions download pdf (Page 10)

English

How to use

• Turn the appliance off.

• Apply the oil to the blade before and after each use.

(See page 14.)

• The appliance may not operate in an ambient temperature lower

than approximately 5 °C.

• Do not use with shaving foam applied or when the beard is wet.



to trim.

• Before trimming, comb your moustache with a comb.



trimming height as needed�

Press and trim�

• The power cannot be turned on when the

switch lock lamp ( ) blinks, as the power

switch is locked.

Press the power switch for more than

2 seconds to unlock. (See this page.)

Using the trimming height comb attachment

(See page 11.)

Using the detail trimming attachment

(See page 12.)

Using without the attachment

(See page 12.)

When the battery capacity is low “LOW” blinks when

operating the appliance.

The appliance beeps twice after switched off.

You can trim approx. 5 minutes after “LOW” blinks.

(This will differ depending on usage.)

Press 



 

1. Press

for more than 2 seconds.

• The switch lock lamp ( ) will light up for

5 seconds and turn off.

• The appliance will stop operating.

2. Release .

 

1. Press

for more than 2 seconds.

• The switch lock lamp ( ) will turn off.

2. Once the appliance starts operating, release .

AC operation

If you connect the AC adaptor to the appliance in the same way as

for charging, and turn on the power, you can use it.

• If the remaining battery is too low, the blades may move slowly

or stop, even with the AC operation. In this case, charge the

battery for 1 minute or more.

• The battery will be discharged, even with the AC operation.

ER-SB60_ME.indb 10 7/19/2017 9:35:14 AM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Comments to this Manuals

No comments

Panasonic ERSB60 Operations Instructions Page 10

Comments to this Manuals