Panasonic SD207 User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
CLASS I FOR BS415/BS3456
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
WARNING...THIS APPLIANCE MUST BE EARTHED.
FOR U.K. ONLY
IMPORTANT
How to replace the fuse.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience.
A 13 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13 amps
and that it is approved by ASTA or BSI to BS1362.
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used untill a replacement cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME,
THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring code as shown below.
If in any doubt please consult a qualified electrician.
The wires in this mains lead are coloured in accordance with the following code;
Green-and-yellow: Earth
Blue: Neutral
Brown: Live
The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug which is
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal in the plug which is
marked with the letter N
or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which is
Open the fuse compartment with a screwdriver and replace the fuse.
marked with the letter L
or coloured RED.
This appliance requires a 13 AMP fuse.
This apparatus was produced to BS 800 (1983).
marked with the letter E
or by the Earth symbol
or coloured GREEN or GREEN-and-YELLOW.
Check for the ASTA mark or the BSI mark on the body of the fuse.
Fuse
English
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 63 64

Comments to this Manuals

No comments