Panasonic DMC-FT3 Operations Instructions download pdf (Page 106)

- 106 -

Recording

For details on [Rec] Mode menu settings, refer to P44.

You can take bright pictures in dark places by setting [Min. Shtr Speed] slower. Also, you

can set it faster to reduce the blur of the subject.

Applicable modes:

[AUTO], [1/125], [1/60], [1/30], [1/15], [1/8], [1/4], [1/2], [1]

Note

•

This should usually be set to [AUTO] to take pictures. (When you select a minimum shutter

speed other than [AUTO], [ ] appears on the screen.)

• When [AUTO] is selected, shutter speed may be set up to 1 second when there is not much

jitter to adjust with the [Stabilizer], or when [Stabilizer] is set to [OFF].

• Setting [Min. Shtr Speed] to slower speed might increase the chance of jitter, so we

recommend using a tripod and the self-timer for taking pictures.

• Setting [Min. Shtr Speed] to faster speed might make the picture darker, so we recommend

recording the picture in well-lit area. If correct exposure cannot be achieved, [ ] will flash in

red when the shutter button is pressed halfway.

For details on [Rec] Mode menu settings, refer to P44.

Pictures with sharp profile and resolution can be taken by utilising the Intelligent

Resolution Technology.

Applicable modes:

Note

•

Refer to P55 for information about the Intelligent Zoom.

[Min. Shtr Speed]

Minimum shutter speed setting 1/125 1

Brightness Darker Brighter

Jitter Less More

[i.Resolution]

[ON] [i.Resolution] is activated.

[i.ZOOM] [i.Resolution] is activated, and the zoom magnification is increased by

approximately 1.3

k without noticeable deterioration in the picture.

[OFF]

—

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 185 186

No comments

Panasonic DMC-FT3 Operations Instructions Page 106