Panasonic DMC-FT3 Operations Instructions download pdf (Page 175)

Others

- 175 -

• [GPS Setting] is set to [OFF]. (P84)

• Radio waves from GPS satellites may not be received depending on the recording

environment, such as indoors or close to a building. (P83)

> It is recommended to use by holding the camera still for a while at an outdoor location clear

to the sky, with the antenna pointed upward.

• [GPS Setting] is set to [ON].

> Set [GPS Setting] to [OFF] or [ ] when you turn the unit off onboard an airplane or inside

a hospital etc.

• It may take a few minutes the first time you use it or when it has not been used for a while.

• Positioning is performed within 2 minutes normally, but since the position of the GPS satellites

change, it may take longer depending on the location or environment of the recording.

• It will take longer for positioning in an environment where it is harder to receive the radio waves

from the GPS satellites. (P83)

• Straight after the power is turned on, or when the GPS icon is not set to [ ], current location

and location name information stored in the unit may differ significantly.

• It can be changed to a different candidate before recording a picture when [ ] is displayed.

(P87)

• When a landmark etc. does not exist nearby or no information is registered in the database of

the unit, [---] is displayed. (P85)

> You can enter location names etc. with [Place-Name Edit] during the playback. (P126)

About the GPS

Positioning is not possible.

GPS status indicator is lit while the power is turned off.

Positioning takes time.

Location name information is different from the place the picture was recorded

in.

Location name information is not displayed.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 185 186

No comments

Panasonic DMC-FT3 Operations Instructions Page 175