Panasonic HCV100EB Operations Instructions Page 87

  • Download
  • Add to my manuals
  • Print
  • Page
    / 116
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 86
87
VQT3Y11
Connect this unit to the PC after the software applications are installed.
Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
Insert the plugs as far as they will go.
1 Connect this unit to the AC adaptor.
Use the AC adaptor to free you from worrying about the battery running down.
2 Turn on the unit.
This function is available in all modes.
3 Connect this unit to a PC.
The USB function selection screen will appear.
4 Select [PC] using the cursor button on the unit and press the ENTER
button.
The Smart wizard screen is automatically displayed when HD Writer LE 1.1 is installed.
This unit is automatically recognised as an external drive of the PC. (l 89)
When you select an option other than [PC], reconnect the USB cable.
When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor
button to turn the LCD monitor on.
Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
When this unit is connected to a PC using a USB cable while the unit is turned on, power is
also supplied from the PC to this unit.
When the unit is connected to a PC, it cannot be turned off.
Disconnect the USB cable, before turning this unit off.
When performing reading/writing between a PC and an SD card, be aware that some SD
card slots built into PCs and some SD card readers are not compatible with the SDHC
Memory Card or SDXC Memory Card.
When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
With a PC
Connecting to a PC
HC-V100&V100MEB_VQT3Y11_mst.book 87 ページ 2012年1月8日 日曜日 午後2時18分
Page view 86
1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 115 116

Comments to this Manuals

No comments