Panasonic SDRH85 User Manual download pdf (Page 35)

35

VQT2N84

This unit will resume recording pause mode

about 0.8 seconds after the LCD monitor is

reopened.

≥ Start time will not shorten if there is no SD

card inserted.

Start time will be shorten if the [Built-

inMemory] is selected in the [MEDIA

SELECT], even if there is no SD card

inserted.

Start time will be shorten if the [HDD] is

selected in the [MEDIA SELECT], even if

there is no SD card inserted.

¬ Change the mode to .

1 Select the menu. (l 23)

2 Close the LCD monitor while

the mode is set to .

The status indicator A flashes green and the

unit goes into quick start standby mode.

3 Open the LCD monitor.

The status indicator A lights red and the unit

is put into recording pause.

≥ When in quick start standby mode

about 70% of the power used in

recording pause mode is being

consumed, so the recording time will

be reduced.

≥ Quick start standby mode is cancelled if

jabout 5 minutes elapsed

jmode is set to

≥ It may take some time for automatic white

balance to adjust.

≥ In the quick start mode, the zoom

magnification becomes 1k.

≥ If [ECONOMY] (l 25) is set to

[5 MINUTES] and the unit automatically

goes into quick start standby mode, close

the LCD monitor and then open it again.

≥ Turn the unit off using the power button.

When the power is turned on with the mode

set to , the unit will enter the recording

pause mode after about 1.9 seconds.

Select the menu. (l 23)

≥ In the quick power on mode, the zoom

magnification becomes 1k.

Quick start

[SETUP] # [QUICK START] # [ON]

SDR-T50

SDR-H85



Quick power on

[SETUP] # [QUICK POWER ON] #

[ON]

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 115 116

Comments to this Manuals

No comments