Panasonic SDRH85 User Manual Page 93

  • Download
  • Add to my manuals
  • Print
  • Page
    / 116
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 92
93
VQT2N84
To disconnect USB cable
safely
1 Double click the icon in task tray
displayed on the PC.
Depending on your PC’s settings, this
icon may not be displayed.
2 Select [USB Mass Storage Device]
and click [Stop].
3
Verify [MATSHITA SDR-S50/SD USB
Device] is selected and click [OK].
Verify [MATSHITA SDR-S45/SD USB
Device] is selected and click [OK].
Verify [MATSHITA SDR-T50/SD USB
Device] or [MATSHITA SDR-T50/MEM
USB Device] is selected and click
[OK].
Verify [MATSHITA SDR-H85/SD USB
Device] or [MATSHITA SDR-H85/HDD
USB Device] is selected and click
[OK].
Charging the battery using USB bus power
When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc
recorder or Panasonic DVD recorder, the battery will charge.
When connecting this unit to a PC for the first time, make sure to connect this unit to
the PC with the power of this unit turned on.
Insert the USB cable securely all the way. It will not operate properly if it is not inserted all
the way.
Do not use any other USB cables except the supplied one.
*
Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.
During charging, the status indicator flashes. When charging is finished, the status
indicator turns off.
Charging cannot be carried out if the status indicator flashes quickly for about 1 minute and
then goes out, or if it does not illuminate at all. Use the AC adaptor to charge. (l 14)
Charging will take 2-3 times longer than charging with the AC adaptor.
Use the AC adaptor when charging the high capacity battery (VW-VBK360; optional).
If the status indicator flashes at a particularly fast or slow rate, refer to page 110.
* A USB cable is not supplied with the SDR-S45.
SDR-S50
SDR-S45
SDR-T50
SDR-H85
Page view 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 115 116

Comments to this Manuals

No comments