Panasonic SDRS7 User Manual download pdf (Page 13)

13VQT1R13

● SDHC Memory Cards can be used only with SDHC devices.

Be careful when sharing cards between devices.

● Be sure to format SD cards with this unit only.

If cards are formatted on a PC or other device, recording may take time and

the card may become unusable with the unit.

● Before using an SD card from another device, copy the data onto a PC or

other storage device and then format the card with this unit.

● Keep the Memory Card out of reach of children to prevent swallowing.

● This unit supports SD Memory Cards formatted to FAT12 or FAT16 file

systems and SDHC Memory Cards formatted to a FAT32 file system.

● SD speed Class 2

Class 2 speed standard for SD cards. This and higher types of SD cards

operate stably in devices for which Class 2 or higher SD cards are

recommended such as this unit.

Precautions in handling

• Do not touch the terminals on the back of the card. Also, prevent dirt, water

and foreign matter from adhering to terminals.

• Do not leave cards in the following areas:

· Where exposed to direct sunlight

· Humid or dusty places

· Near heaters and sources of heat

· Where subjected to sharp temperature changes (condensation can occur)

· Where exposed to static electricity or electromagnetic waves

• After use, return cards to their pouch or case.

• SD card data may be corrupted or lost due to electrical noise, static

electricity, damage to the unit or card, etc. Save important data on a PC

using the supplied USB cable, MotionSD STUDIO, etc. (P.70)

Write-protecting cards

When the write-protect switch on the SD card is set to the LOCK position,

data cannot be written onto or deleted from the card, and the card cannot be

formatted.

Write-protect switch

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 99 100

No comments

Panasonic SDRS7 User Manual Page 13