Panasonic SDRS7 User Manual download pdf (Page 59)

59VQT1R13

Connecting this unit and a DVD burner

Connect the AC adaptor provided with the DVD burner to the DVD burner.

Connect the unit and AC adaptor (P.14) and set the mode dial to a position

other than [OFF].

Connect this unit and the DVD burner with the mini AB USB connection

cable.

Insert the plugs as far as they will go.

Mini-A plug Mini-B plug

Insert a disc into the DVD burner.

[DVD BURNER] display

• Once connected, the [DVD BURNER] display

appears on the LCD monitor of the unit. If it

does not appear, reconnect the mini AB USB

connection cable.

• First connect the DVD burner to the unit, and

then insert the disc.

Motion pictures and still pictures recorded with this unit can be copied to

discs using DVD burners (sold separately).

● Use the mini AB USB connection cable that comes with the DVD burner (sold

separately). Operation is not guaranteed with other cables.

● Connect the unit directory to the DVD burner without going through a USB

hub.

● Ensure without fail that only the AC adaptors designed solely to be used with

the unit and DVD burner are connected. Power cannot be supplied from the

unit to the DVD burner using a USB connection. While powered by the battery,

the unit and DVD burner cannot be connected for use.

● If the DVD burner is connected to this unit with a disc already inserted, the

message “CANNOT CHECK CONNECTED DEVICE. DISCONNECT THE

USB CABLE FROM THIS UNIT.” may be displayed after “Please Wait.” is

displayed for over a minute. When this happens, disconnect the Mini AB USB

Connection Cable from the unit and remove the disc from the DVD burner to

make sure the disc is usable and was not inserted upside down.

● If “READING DISC...” is displayed on the screen for more than 2 minutes,

remove the disc from the DVD burner and make sure the disc is usable and

was not inserted upside down.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 99 100

No comments

Panasonic SDRS7 User Manual Page 59