Panasonic AW-E860 Technical Information

Panasonic Broadcast AW-E860N Menu Information

-34-Menu item setting$Setting and changing of the setting (HalogenMode, Fluorescent Mode, Outdoor Mode)1 Brightness Set Display1 Video Level Adjustmen

-35-5 Auto Gain Up Control Setting [Auto Gain Up: OFF, ON]OFF: The light quantity is not adjusted automatically.ON: The light quantity is adjusted aut

-36-Menu item setting8 Black Level Setting [Pedestal: –150 to +150]The black level (pedestal) of the luminance (Y) signal canbe set. Used in adjusting

-37-5600K: The white balance is adjusted to 5600Killumination.< ATW Speed Setting[ATW Speed: Slow 2, Slow 1, Mid, Fast 1, Fast 2]ATW Speed can be s

-38-Menu item setting4 Sharpness (DTL) Set DisplayBDetail Select Setting [DTL Select: Sharpness, Super DTL]If contour correction is not sufficient at

-39-5 Other Set DisplayG Contrast Adjustment[Contrast (Gamma): Low, Mid, High]Contrast can be adjusted to any of three levels.H Electronic Shutter Set

-40-Menu item settingK PC Control Access Speed Setting [Baud Rate: 1200bps, 2400bps, 4800bps, 9600bps]Select a communication speed in controlling the

-41-6Iris, Shutter, Gain Set DisplayP–––––Q–––––R–––––S–––––T–––––U–––––V–––––W––––––7Color Set DisplayX–––––Y–––––Z––––––[–––––\–––––8G/L, Color Bar

-42-Menu item settingn–––––n–––––––––––––:Color Matrix Set Display ;Other Set Displayo–––––p–––––q––––––r–––––s–––––t–––––u–––––v–––––w–––––x–––––y–––

-43-$ Setting and changing of the settingitems (User Mode)6 Iris, Shutter, Gain Set DisplayP Video Level Adjustment [Picture Level: –50 to +50]Converg

-26-Adjustment$ Total pedestal level adjustment(Use an oscilloscope or a waveform monitor for thisadjustment.)This step is to adjust the black levels

-44-Menu item settingT Electronic Shutter Mode Setting[Shutter Mode: Step, S/Scan, ELC]Step: Electronic shutter operates at the speed selectedby the E

-45-V Gain Setting[Gain: Auto, 0 dB to 30 dB, N/Eye L, N/Eye H]Auto: The light quantity is adjustedautomatically.0 dB: 0 dB should be selected in norm

-46-Menu item settingW AGC Maximum Gain Setting[AGC Max Gain: 6dB, 12dB, 18dB, 24dB, N/Eye L,N/Eye H]This is used to set the maximum gain up when “Aut

-47-Z ATW Speed Setting[ATW Speed: Slow 2, Slow 1, Mid, Fast 1, Fast 2]ATW Speed can be set.[ Black Level Setting [Pedestal: –150 to +150]The black le

-48-Menu item setting8 G/L, Color Bar Set Display] Horizontal Phase Adjustment [H Phase: –206 to +49]Horizontal phase can be adjusted when a genlock s

-49-h Noise Suppress Level Setting[Noise Suppress: 1 to 10]Screen noise can be reduced with the Detail LevelSetting at High or Low. If the noise suppr

-50-Menu item setting: Color Matrix Set Displayn B_Mg Gain: Increases or decreases the intermediatecolor between blue and magenta.B_Mg Phase: Varies t

-51-; Other Set Displayo Gamma Level Setting [Gamma: 0.35 to 0.55]Gamma correction level can be set.p Knee Level Setting[Knee Point: 88% to 98%, Dynam

-52-< Optional Card Setting Sub MenuThis sub menu appears when a studio card (AW-PB305 orAW-PB506) has been inserted into the optional card slot.1.

-53-$ Setting to initial setIn case of the wrong setting in any use mode, take thefollowing steps to return to the initial settings.(1) Select [Initia

-27-$ Gen-lock adjustmentPhase adjustments must be performed with the camera orthe RCU (RCB) when external synchronizing signals aresupplied to the sy

-54-$ Initial settings of the setting items (Factory preset values)U Halogen, Fluorescent, Outdoor ModePicture Level ±0 ±0 ±0Light PEAK/AVG 0 0 0Light

-55-U User ModePicture Level ±0Light PEAK/AVG 0Light Area Top cutIris,Shutter, Auto Iris Adjust OFFGain Set Shutter Mode StepStep/Synchro OFFGain 0dBA

-56-B_Mg Gain ±0B_Mg Phase ±0Mg Gain +27Mg Phase ±0Mg_R Gain ±0Mg_R Phase ±0R Gain +15R Phase ±0R_Yl Gain ±0R_Yl Phase ±0Yl Gain +18Color

-28-Caution:• When horizontal phase adjustment is required using RCU(RCB) or hybrid control panel, BAR/CAM switch should beset to BAR. Horizontal phas

-29-Use mode setting$ Use Mode SettingThe camera has four use modes, and various functions forfour use modes have been preset.Functions can be set as

-30-Scene File Switch Scene File Switch Operation mode Position of Position of Hybrid RCU (RCB) control panelHalogen Mode 1 1Fluorescent Mode 2 2Out

-31-Menu item setting$ Menu item setting• Each of the four use modes of the camera has a mainmenu. (Shown at right)• Each item of the main menu has a

-32-Menu item setting❈ If the output signal from camera is color bar, only “G/L,Color Bar Set” screen is displayed.$ Setting1. From the camera alone:K

-33-1Brightness Set Display1–––––2–––––3–––––4–––––5–––––6––––––7–––––8–––––2Color Set Display9–––––:–––––;–––––<––––––3G/L, Color Bar Set Display=