Panasonic WJHD220 Operations Instructions Page 96
- Page / 104
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
96
You can implement any of the following operations as necessary.
REMOVE LINK: Logically removes the HDD link.
HDD FORMAT: Formats the HDD.
RESTART: Closes the menu, and restarts the recorder.
The menu can also be displayed manually when you need to format the HDD or remove the logical link.
1. Turn off the power of the recorder once, and turn it on again.
The multiscreen monitor displays the message "SYSTEM CHECK DONE! TO OPEN DISK MENU, PUSH STOP KEY".
2. Press the [STOP] button.
The DISK MENU opens.
3. Select REMOVE LINK, HDD FORMAT, or RESTART.
Auto-remove
When no button is pressed for one minute after opening the DISK MENU, the recorder will logically remove a disk that meets
any of the conditions below.
• An HDD has been categorized as " * ", "LOST", or "ERR".
• Restart was repeated 3 times due to writing error.
● DISK MENU
8 Disk Menu
The menu appears if the hard disk error is found during
power-up.
The buzzer beeps every 5 seconds, and the ERROR
indicator turns off.
Press any button other than [STOP] to mute the buzzer
beep.
The hard disk status and required operations are shown in the table.
DISK MENU
NO.1:XXX.XXGB
NO.2:XXX.XXGB
REMOVE LINK SET
→
HDD FORMAT SET
→
RESTART SET
→
Hard Disk Status
Operation
Abbreviation Status Required
–
Format, remove link ,or replace HDD
if erred even after formatting.
Note
WR1 or WR2 appears in SYSTEM LOG
when indicating a writing error.
Normal status
Writing error
Same as above.LOST or * status was left for
one minute.
All existing HDD have been previously
used in another WJ-HD220.
Restart or FormatAwaiting format
HDD is removed without executing
REMOVE LINK command.
Remove link, or add a new HDD.HDD physically removed
FormatHDD added, and awaiting
format
Capacity
ERR
*
LOST
ADD
REMOVE LINK command has been
previously carried out.
Previous time and this time,
HDD physically or logically
removed
–
- WJ-HD220 1
- WARNING: 2
- CAUTION: 2
- IMPORTANT SAFETY INSTRUCTIONS 3
- CONTENTS 4
- FEATURES 5
- PRECAUTIONS 6
- ■ Front View 7
- ■ Rear View 10
- INSTALLATION 11
- ■ Mounting in the Rack 12
- <Basic System> 13
- Data System> 14
- <Network System> 15
- ■ Connection with the Camera 16
- ■ ALARM/REMOTE Connection 16
- ● Alarm Connection 17
- ● Time Adjusting Connection 17
- ■ Serial Port Connections 18
- (#5 : OFF, #6 : ON) 19
- DIP Switch 19
- (#5 : ON, #6 : OFF) 19
- DIP Switch Setting 20
- SETUP PROCEDURES 21
- ● Menu Tree 23
- ■ Initializing 24
- ■ Main Menu (WJ-HD220 MAIN 25
- SETUP, NO. 1-4) 26
- REC MODE) 26
- ■ Manual Recording Setup (REC 28
- Mode (EXT REC SETUP) 28
- PLAY PLAY 29
- ● Remote LED (REMOTE LED) 30
- ● Disk Check (HDD CHECK) 30
- ■ System Setup (SYSTEM SETUP) 31
- ● Resolution (RESOLUTION) 35
- ● HDD Safety Mode (HDD SAFETY 36
- ■ Alarm Setup (ALARM SETUP) 37
- ■ Communication Setup 38
- (COMMUNICATION SETUP) 38
- ■ Serial Port Setup 38
- (SERIAL PORT SETUP) 38
- ■ Switcher Setup (SWITCHER 41
- ■ Network Setup (NETWORK 41
- ■ System Information 43
- (SYSTEM INFORMATION) 43
- ■ Language (LANGUAGE) 44
- OPERATING PROCEDURES 45
- ■ On the Multiscreen Monitor 46
- Alarm Control Function 47
- ■ Resetting Alarm 48
- ■ Suspending Alarm Input 49
- Recording 50
- ■ Alarm Recording 51
- ■ Power-on Recording 51
- ■ Manual Recording 51
- Playback 52
- ■ Multiscreen Playback 53
- Lock/Unlock Buttons 54
- ■ Password Verification 54
- ■ Enabling Button Lock 54
- NETWORK OPERATION 55
- PREPARATIONS 56
- <System Expansion> 57
- ■ Main Page and Control Panel 58
- WJ-HD220 SETUP 59
- ● Programming (PROGRAM SETUP) 60
- NO.1-4 SETUP) 60
- ACTION SETUP) 61
- 8 Mode (MODE) 62
- ■ Camera Title (CAMERA TITLE) 64
- ■ Video Motion Detector Setup 66
- (VMD SETUP) 66
- ■ VMD Area Setup (VMD AREA 66
- ■ Camera System Setup 68
- (CAMERA SYSTEM SETUP) 68
- (only for PS·DATA) 68
- 8 Dynamic DNS (DYNAMIC DNS) 69
- 8 Camera Channel (CAMERA CH) 71
- 8 Time (TIME) 71
- ■ System Information (SYSTEM 72
- INFORMATION) 72
- ■ System Log (SYSTEM LOG) 73
- Connections 73
- (ERROR INFORMATION (FTP 73
- SMTP, DDNS)) 73
- NETWORK CONFIGURATION 74
- 8 Basic Setup (BASIC SETUP) 75
- PERIODIC TIMER) 75
- ■ Mail Setup (MAIL SETUP) 76
- ■ Network Video Setup 77
- (NETWORK VIDEO SETUP) 77
- OPERATING WJ-HD220 78
- ■ Main Control Panel 80
- CONTROL VIEW) 81
- ■ Alarm List 82
- ■ HTTP Download and Viewing 83
- TROUBLESHOOTING 84
- SPECIFICATIONS & 85
- APPENDIX 85
- SPECIFICATIONS 86
- STANDARD ACCESSORIES 87
- Hold down 89
- 2 seconds 89
- 1. Transmission Command 90
- 2. Response Command 90
- Basic Operation 91
- Alarm Control 91
- Setup Control 92
- Miscellaneous Control 92
- Data Log Control 92
- Media Control 93
- ■ HDD Maintenance 94
- 8 HDD Check 95
- When Error Detected 95
- 8 FULL Indicator 95
- 8 DISK END Setup 95
- 8 Disk Menu 96
- 8 Formatting HDD (HDD FORMAT) 97
- 8 Restarting (RESTART) 98
- ● Alarm Notice Mail 99
- ● Error Notice Mail 99
- ■ Network Security 100
- ■ Network Error Information 101
- ● DDNS Errors 102
- ● FTP Errors 102
- Osaka, Japan 104
Related products and manuals for Camera accessories Panasonic WJHD220
(42 pages)© 2020, manymanuals.com. All rights reserved. | 2.629 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals