Panasonic WVCF250 Operations Instructions download pdf (Page 17)

-15-

1. Camera Identification (CAMERA ID)

Setting

You can use the camera identification (CAMERA

ID) to assign a name to the camera. The camera ID

consists of up to 16 alphanumeric characters. You

can select whether to have the camera ID dis-

played on the monitor screen or not.

To edit the CAMERA ID

1. Move the cursor to the CAMERA ID parameter.

2. Press (S). The CAMERA ID menu appears.

The cursor on the letter “0” starts blinking.

3. Move the cursor to the character you want to

change by pressing (L)/ (R)/ (U)/

(D).

4. After selecting the character, press (S).

The selected character appears in the editing

area. (The pointer in the editing area moves to

the right automatically at this moment.)

5. Repeat the steps above until all characters are

edited.

To enter a blank space in the CAMERA ID

Move the cursor to SPACE and press (S).

To edit a specific character in the CAMERA ID

1. Move the cursor to the editing area by press-

ing (S).

2. Move the pointer to the character to be edited

by pressing (L) or (R). Then move the

cursor to the character area and select a new

character.

3. Press (S) to determine the CAMERA ID.

Character Cursor

Pointer

Character

Area

Command

Editing

Area

CAMERA ID menu

** CAM SET UP **

CAMERA ID OFF

ALC/ELC ALC

SHUTTER ---

AGC ON

SYNC INT

WHITE BAL ATW

END SET UP ENABLE

↵↵↵

0123456789

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

().,'":;&#!?=

+-*/%$ÄÜÖÆÑÅ

SPACE

POSI RET END RESET

................

SETTING PROCEDURES

To erase all characters in the editing area

Move the cursor to RESET and press (S). All

characters in the editing area disappear.

To determine the display position of the

CAMERA ID

1. Move the cursor to POSI, and press (S).

The display shown below appears and the

CAMERA ID starts blinking.

Blinking

2. Move the CAMERA ID to the desired position

by pressing (L)/ (R)/ (U)/ (D).

3. Press (S) to fix the position of the CAMERA

ID. The mode returns to the previous CAMERA

ID menu.

Notes:

• The CAMERA ID stops at the edges of the

monitor screen.

• The CAMERA ID moves faster if any of

(L)/ (R)/ (U)/ (D) is kept

pressed for a second or longer.

To return to the CAM SET UP menu

Move the cursor to RET and press (S). The

CAM SET UP menu appears.

2. Light Control Setting (ALC/ELC)

You can select one of the following light control

modes:

ALC: This camera has an ALC lens.

ELC: If you select this mode, the iris is kept open.

The brightness is automatically controlled.

1. Move the cursor to the ALC/ELC parameter.

2. Select ALC or ELC.

WV-CF254

** CAM SET UP **

CAMERA ID OFF

ALC/ELC ALC

SHUTTER ---

AGC ON

SYNC INT

WHITE BAL ATW

END SET UP ENABLE

↵↵↵

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments