Panasonic WVCF250 Operations Instructions download pdf (Page 19)

-17-

4. Repeat step 3 to mask the desired areas. To

cancel masking, move the cursor to that area

and press (S).

5. After masking is completed, press (S) for 2

seconds or longer. The ALC CONT menu

appears.

6. If you want to change the video output level

(picture contrast), move the “I” cursor to

LEVEL and adjust the level.

7. Move the cursor to RET and press (S) to

return to the CAM SET UP menu. (To return to

the camera picture, move the cursor to END

and press (S).)

3. Shutter Speed Setting (SHUTTER)

Note: When ON is selected for SUPER-D on the

ALC CONT menu, this item is not available.

To select electronic shutter speed, select OFF

for SUPER-D in the menu.

You can select an electronic shutter speed of 1/50

(OFF), 1/120, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000,

or 1/10 000 seconds.

Blinking

Turns to white

Move the cursor to the SHUTTER parameter and

select the electronic shutter speed.

The preset values for SHUTTER (electronic shutter

speed) change by pressing (L) or (R) as

follows:

** CAM SET UP **

CAMERA ID OFF

ALC/ELC ALC

SHUTTER ---

AGC ON

SYNC INT

WHITE BAL ATW

END SET UP ENABLE

↵↵↵

OFF (1/50) 1/120

1/10000 1/4000 1/2000 1/1000

1/250 1/500

4. Gain Control Setting (AGC ON/OFF)

You can set the gain (brightness level portion of an

image) to automatic level adjustment (ON) or fixed

level (OFF).

Move the cursor to the AGC parameter and select

automatic level adjustment (ON) or fixed level

(OFF).

5. Synchronization Setting (SYNC)

You can select internal sync mode (INT) or line-lock

mode (LL). The VD2 signal (multiplexed vertical

drive signal) with the composite video output signal

from external equipment such as a Matrix Switcher

is also acceptable.

Whenever the VD2 signal is supplied to this cam-

era, the camera automatically switches to the VD2

sync mode.

1. Move the cursor to the SYNC parameter and

select line-lock (LL) or internal (INT).

2. Press (S).

If LL is selected, the SYNC menu appears. (If

INT is selected, the synchronization mode is

automatically set to internal sync pulse, and

the menu is not displayed.)

** CAM SET UP **

CAMERA ID OFF

ALC/ELC ALC

SHUTTER ---

AGC ON

SYNC INT

WHITE BAL ATW

END SET UP ENABLE

↵↵↵

** CAM SET UP **

CAMERA ID OFF

ALC/ELC ALC

SHUTTER ---

AGC ON

SYNC INT

WHITE BAL ATW

END SET UP ENABLE

↵↵↵

Important Notices:

1. The priority for the sync modes is as follows.

1. Multiplexed Vertical Drive (VD2) (Highest

priority)

2. Line-lock (LL)

3. Internal Sync (INT) (Lowest priority)

2. The line-lock mode has its own menu for line-

lock vertical phase adjustment. If the camera

installation is relocated, check the vertical

phase adjustment again since the AC line

phase may be different.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Panasonic WVCF250 Operations Instructions Page 19

Comments to this Manuals

Related products and manuals for Camera accessories Panasonic WVCF250